The CONTEC 5-parameter patient monitor is a multiparameter vital-signs monitor designed for continuous monitoring of essential physiological parameters. The standard five-parameter configuration includes ECG, SpO₂, NIBP, respiration (RESP), and temperature (TEMP).
CONTEC's CMS8000 platform, for example, supports adult, pediatric and neonatal monitoring and uses a 12.1-inch colour TFT display with real-time waveforms and parameter information. The manufacturer also lists ECG, RESP, SpO₂, NIBP and dual-channel temperature among its standard parameters.
The CONTEC patient monitor provides a combination of commonly required monitoring functions in one bedside unit:
ECG – heart rate and ECG waveform monitoring
SpO₂ – oxygen saturation and pulse-rate monitoring
NIBP – non-invasive blood pressure monitoring
RESP – respiration rate and waveform monitoring
TEMP – temperature measurement
The CONTEC CMS8000 documentation also describes arrhythmia and ST-segment analysis, audible and visual alarms, trend-data functions and optional parameters such as IBP and CO₂ depending on configuration.
A CONTEC patient monitor with stand provides a practical trolley-mounted setup for bedside monitoring. A stand allows the monitor to be positioned next to a hospital bed and moved between suitable clinical areas when required.
When purchasing a CONTEC monitor with stand, confirm whether the quoted package includes the trolley, monitor mounting bracket and other accessories, as package contents can vary between suppliers.
The CONTEC multiparameter patient monitor combines several physiological measurements into a single display. This allows clinical staff to review multiple vital signs and associated waveforms from one monitoring station.
Depending on the exact CONTEC model and configuration, additional capabilities may include central monitoring connectivity, optional thermal recording, trend storage and optional IBP or CO₂ monitoring.
The five core parameters are:
ECG monitoring displays the patient's cardiac electrical activity and heart rate. The documented CONTEC CMS8000 platform also provides ECG waveform display and supports arrhythmia and ST-segment analysis.
SpO₂ monitoring measures peripheral oxygen saturation and provides pulse-rate information together with a plethysmographic waveform on supported configurations.
Non-invasive blood pressure monitoring provides systolic, diastolic and mean pressure measurements.
RESP monitoring displays respiration rate and the associated respiration waveform.
The CONTEC CMS8000 specification includes dual-channel temperature monitoring, identified as T1, T2 and temperature difference (TD).
5-parameter patient monitoring
ECG monitoring
SpO₂ monitoring
NIBP monitoring
Respiration monitoring
Temperature monitoring
Real-time waveform display
Audible and visual alarms
Trend-data storage
Rechargeable battery on supported models
Adult, pediatric and neonatal monitoring on supported configurations
Compact bedside design
Stand/trolley mounting option where supplied
Optional additional parameters on compatible configurations
Optional printer/recorder on selected models
Wired or wireless central monitoring connectivity on compatible configurations
The CONTEC 5-parameter patient monitor can be used in clinical environments where routine monitoring of multiple vital signs is required, subject to the exact model and configuration.
The monitor can be positioned beside a patient's bed for ongoing observation of vital signs.
The five-parameter configuration can provide ECG, SpO₂, NIBP, respiration and temperature monitoring. Facilities requiring invasive pressure or CO₂ monitoring should confirm that the selected CONTEC configuration includes the required options.
A multiparameter monitor can be used for perioperative and recovery monitoring when configured with the appropriate accessories and parameters.
The combination of ECG, SpO₂, NIBP, respiration and temperature provides several commonly monitored physiological measurements in acute-care environments.
The compact design of suitable CONTEC models can make them useful for clinical examination and observation areas where multiparameter monitoring is required.
CONTEC's CMS8000 documentation states that the monitor can be used for adult, pediatric and neonate clinical monitoring. Appropriate patient-category settings, cuffs, sensors and probes should be selected for the individual patient and exact model.
The monitor should be operated by trained healthcare personnel and according to the manufacturer's instructions.
Position the monitor securely on its stand or approved mounting system.
Connect the ECG cable and electrodes.
Connect the appropriate SpO₂ sensor.
Select and apply the correct NIBP cuff.
Connect the temperature probe.
Confirm the selected patient category.
Check that the displayed waveforms and readings are appropriate.
Set alarm limits according to clinical requirements and facility protocols.
Monitor the displayed parameters and respond to alarms appropriately.
Clean and maintain the monitor and accessories according to the manufacturer's instructions.
Current Kenya listings show that prices for CONTEC 5-parameter patient monitors vary significantly by supplier and package configuration.
One current Kenyan listing shows a CONTEC 5-parameter patient monitor at KSh 90,000, while another listing for a CONTEC 5-parameter monitor without stand shows KSh 81,500.
A Nairobi marketplace listing currently advertises a CONTEC 5-parameter patient monitor at KSh 75,000, while another listing for a CONTEC monitor with stand shows KSh 109,000. These are individual supplier listings rather than a universal market price.
Before comparing prices, check whether the quotation includes the stand, ECG cable, SpO₂ probe, NIBP cuff, temperature probe, battery, warranty and technical support.
Before purchasing a CONTEC multiparameter patient monitor, confirm:
Exact CONTEC model number
Five-parameter configuration
Screen size and display type
ECG lead configuration
SpO₂ sensor type
NIBP cuff sizes supplied
Temperature probe configuration
Adult, pediatric and neonatal compatibility
Battery availability and runtime
Whether a trolley/stand is included
Optional IBP or CO₂ requirements
Printer/recorder requirements
Central monitoring connectivity
Warranty and after-sales support
Availability of replacement probes, cuffs and cables
Specifications can vary between CONTEC models, so the exact model and supplied configuration should be confirmed before purchase.
A CONTEC 5-parameter patient monitor is a multiparameter monitor configured to measure ECG, SpO₂, NIBP, respiration and temperature.
The five parameters are ECG, SpO₂, NIBP, RESP and TEMP.
CONTEC monitors can be supplied in trolley or stand-mounted configurations. Confirm the exact package before ordering because stands are not included with every listing. For example, one Kenyan listing specifically identifies its CONTEC monitor as being supplied without a stand.
Selected CONTEC models, including the CMS8000, support adult, pediatric and neonatal monitoring. Appropriate patient accessories and settings should be used.
Yes. The five-parameter configuration includes ECG, SpO₂ and NIBP, together with respiration and temperature.
Some CONTEC models/configurations support CO₂ as an optional parameter. It should not be assumed to be included in every 5-parameter package.
Current Kenyan listings reviewed for this page range from approximately KSh 75,000 to KSh 109,000 for several CONTEC 5-parameter listings, with the exact price depending on the supplier and whether a stand and accessories are included.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
