The COMEN ND12 5-parameter patient monitor is a multiparameter bedside monitoring system designed for monitoring essential patient vital signs. The 5-parameter configuration includes ECG, SpO₂, NIBP, respiration (RESP), and temperature (TEMP). The current Kenya listing includes a trolley/stand for mobile use around clinical areas.
With its 12.1-inch display, waveform visualization, configurable alarms, rechargeable battery and multiple mounting options, the COMEN ND12 can be used in settings such as hospital wards, HDU, ICU, theatres, emergency areas and post-operative care, depending on the selected configuration.
The COMEN ND12 monitor provides continuous monitoring of five commonly required physiological parameters:
ECG – electrocardiographic monitoring and heart-rate measurement
SpO₂ – peripheral oxygen saturation and pulse rate
NIBP – non-invasive blood pressure, including systolic, diastolic and mean pressure
RESP – respiration monitoring
TEMP – temperature measurement
The ND12 platform also supports additional functions and optional parameters depending on the specific configuration, so buyers should confirm the exact supplied model before ordering.
This listing is supplied with a medical monitor stand/trolley, providing a practical way to position the monitor beside a patient's bed or move it between clinical areas.
A trolley-mounted configuration can be useful where monitoring equipment needs to be repositioned between beds, wards, treatment areas or procedure rooms. The exact trolley design and included accessories should be confirmed with the supplier before purchase.
The COMEN ND12 has a 12.1-inch 800 × 600 display in the documented ND12 specification, with support for displaying multiple waveforms.
The ND12 supports 3-, 5-, 6- and 12-lead ECG configurations depending on the selected setup. The documented platform includes heart-rate monitoring, ST analysis and arrhythmia analysis functions.
The monitor can display oxygen saturation and pulse-related information together with the associated pleth waveform. Exact sensor technology and configuration should be confirmed when ordering.
The non-invasive blood pressure function provides systolic, diastolic and mean arterial pressure measurements. The documented ND12 platform supports adult, pediatric and neonatal NIBP modes.
RESP monitoring uses thoracic impedance to monitor respiratory activity and display the respiration waveform and rate.
The ND12 supports dual-channel temperature measurement, allowing T1/T2 temperature monitoring in supported configurations.
COMEN ND12 multiparameter patient monitor
5-parameter configuration: ECG, SpO₂, NIBP, RESP and TEMP
12.1-inch colour display
Multiple waveform display
3/5/6/12-lead ECG capability depending on configuration
Heart-rate and ECG monitoring
ST and arrhythmia analysis
Adult, pediatric and neonatal patient support
Automatic, manual and STAT NIBP modes
Visual and audible alarms
Rechargeable lithium-ion battery
USB and network connectivity options
Desktop, wall and trolley mounting options
Supplied with a monitor stand/trolley in the listed configuration
The COMEN patient monitor can be considered for a range of clinical environments where continuous vital-sign monitoring is required, including:
The ND12 can be positioned beside a patient's bed to monitor vital signs during inpatient care.
The monitor's multiparameter configuration can support continuous observation of patients requiring closer physiological monitoring. Additional functions such as IBP and EtCO₂ are configuration-dependent.
The monitor may be used for perioperative and post-operative monitoring when configured with the parameters and accessories required by the facility.
Its trolley-mounted configuration allows the monitor to be moved where monitoring is required, subject to the clinical setup and battery capacity.
The documented ND12 platform supports adult, pediatric and neonatal monitoring modes. Appropriate sensors, cuffs and accessories must be selected for the patient category.
A 5-parameter patient monitor generally refers to a monitor configured to measure:
ECG
SpO₂
NIBP
RESP
TEMP
This combination provides a broad set of routinely monitored vital signs in hospital and clinical environments.
The COMEN ND12 provides these five parameters in the listed configuration, while the wider ND12 platform can support additional options such as invasive blood pressure, EtCO₂ and cardiac output depending on the configuration.
Use the monitor according to the manufacturer's instructions and your facility's clinical procedures.
Position the monitor securely on its stand or another approved mounting system.
Connect the appropriate ECG cable, SpO₂ sensor, NIBP cuff and temperature probe.
Select the appropriate patient category.
Apply sensors and cuffs correctly.
Confirm that the displayed waveforms and measurements are appropriate.
Configure alarm limits according to the patient's clinical requirements and facility protocol.
Monitor the displayed vital signs and respond to alarms according to established clinical procedures.
Clean and maintain the monitor and accessories according to the manufacturer's instructions.
Only trained healthcare personnel should operate the patient monitor for clinical care.
The current Maesio Pharmaceuticals Kenya listing shows the COMEN ND12 5-Parameter Patient Monitor With Stand at KSh 280,000. This is a supplier-specific current listing price and should not be treated as a universal Kenya market price.
A separate Nairobi listing for an ND12 5-parameter patient monitor shows KSh 189,000, demonstrating that prices can vary according to supplier, configuration, condition and included accessories.
When comparing prices, confirm whether the quoted amount includes the trolley/stand, patient cables, sensors, battery, warranty, installation and after-sales support.
When purchasing a COMEN patient monitor, consider:
Required monitoring parameters
Adult, pediatric or neonatal use
Display size and waveform requirements
Whether a trolley or wall mount is needed
Battery requirements
Required ECG lead configuration
SpO₂ sensor type
NIBP cuff sizes
Optional parameters such as IBP or EtCO₂
Network and central monitoring requirements
Warranty and technical support
Availability of replacement accessories
The exact ND12 configuration should be confirmed before purchase because optional parameters, accessories and mounting arrangements can vary.
Specifications are based on the documented ND12 platform and the current Kenya product listing; exact supplied configuration should be confirmed before purchase.
The COMEN ND12 patient monitor is a multiparameter bedside monitor designed to monitor ECG, SpO₂, NIBP, respiration and temperature in its 5-parameter configuration.
The five standard parameters are ECG, SpO₂, NIBP, RESP and TEMP.
The Kenya listing referenced here is the COMEN ND12 5-Parameter Patient Monitor With Stand, with a medical trolley included in the listed configuration.
The documented ND12 specification identifies a 12.1-inch, 800 × 600 display.
Yes. The documented ND12 platform supports adult, pediatric and neonatal patient categories, with appropriate sensors and cuffs required for each patient group.
The ND12 platform supports additional options such as IBP, EtCO₂ and cardiac output depending on configuration. Therefore, confirm the exact parameter set before purchasing.
The current Maesio listing referenced above is KSh 280,000 for the 5-parameter ND12 with stand. Other supplier listings may have different prices depending on configuration and included accessories.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
