The Mindray BeneView T1 patient monitor is a compact multi-parameter monitoring device designed to provide continuity of patient monitoring between different points of care. It can function as a transport monitor when removed from its docking or bedside setup and can also work as a monitoring module within the BeneView patient-monitoring platform.
Mindray designed the BeneView T1 specifically for patient transport, with a lightweight form, carrying handle, battery operation and networking capabilities intended to maintain monitoring information as a patient moves between care areas.
The Mindray BeneView T1 transport monitor is designed to accompany patients during movement between clinical locations.
It can be removed from the BeneView bedside monitor and used independently during transport, allowing monitoring to continue without completely disconnecting the patient from physiological monitoring. Mindray describes the T1 as a mobile assistant between points of care.
Potential transport applications include:
ICU patient transfers
Emergency department transfers
Operating theatre transfers
Recovery-area transfers
Ambulance transport
Interdepartmental hospital transfers
Neonatal and pediatric transfers where the appropriate configuration is used
The current Kenyan listing also identifies ambulance, NICU, operating theatre and emergency transport applications.
The Mindray BeneView T1 bedside monitor can operate as a multi-parameter module within the BeneView monitoring system.
When connected to a compatible BeneView bedside monitor, the T1 can function as part of the bedside monitoring setup. When the patient needs to be transported, the unit can be detached and used as an independent monitor.
This design helps reduce the need to completely reconfigure the monitoring setup every time a patient moves between locations.
The Mindray BeneView T1 provides multiple physiological monitoring parameters in a compact unit.
Mindray identifies ECG, NIBP, temperature, SpO₂, IBP and EtCO₂ among the available monitoring parameters, with additional capabilities including 12-lead ECG, cardiac output and PiCCO depending on configuration.
The exact parameters available should therefore be confirmed against the specific T1 configuration and modules supplied.
Brand: Mindray
Model: BeneView T1
Product type: Transport and bedside patient monitor/module
Primary use: Patient monitoring during transport and at the bedside
Host display: 5-inch colour TFT LCD according to the manufacturer's operator manual
External display: 19-inch display supported through the docking station
Available parameters: ECG, SpO₂, NIBP, temperature, IBP and EtCO₂ depending on configuration
Advanced parameters: 12-lead ECG, CO and PiCCO depending on configuration
Battery: Built-in Li-ion battery
Battery runtime: Up to 5 hours according to Mindray's product information
Weight: Less than 1 kg for the patient-monitor unit
Carrying: Ergonomic handle
Mounting: Bed rail and pole-stand mounting options
Networking: Integrated wireless networking for supported monitoring systems
Data: Full-disclosure and trend storage
Docking: T1 docking station for bedside/system connectivity
Applications: Patient transport, bedside monitoring and multiple points of care
Note: Current Kenyan supplier specifications may differ from older manufacturer documentation, particularly regarding screen size and supplied configuration. Confirm the exact unit and accessories before purchase.
The Mindray BeneView T1 patient monitor supports ECG monitoring for observing cardiac electrical activity.
The T1 can support standard ECG monitoring and, depending on configuration, 12-lead ECG. Mindray also identifies ST analysis among the monitoring capabilities available on the platform.
The monitor supports SpO₂ monitoring using a compatible pulse-oximetry sensor.
Mindray states that the BeneView T1 can be configured with different SpO₂ technologies, including Mindray, Masimo or Nellcor options depending on availability and configuration.
The exact sensor technology and compatible accessories should be confirmed when ordering.
The BeneView T1 supports non-invasive blood pressure monitoring.
The current Kenyan listing describes automatic and manual NIBP functions with trending capability.
The appropriate cuff size should be selected according to the patient's size and the manufacturer's instructions.
The T1 supports temperature monitoring through compatible temperature probes. Mindray identifies temperature as one of the available physiological parameters on the BeneView T1.
Depending on configuration, temperature monitoring can be used alongside ECG, SpO₂, NIBP and other parameters.
The Mindray BeneView T1 can support additional parameters such as invasive blood pressure (IBP) and EtCO₂, depending on the installed modules and configuration. Mindray's documentation lists dedicated IBP and CO₂ modules for the BeneView T series.
These functions should not be assumed to be included in every T1 package. Confirm the required modules and accessories before procurement.
One of the main characteristics of the BeneView T1 transport monitor is its compact size.
Mindray specifies the patient-monitor unit at less than 1 kg and describes an ergonomic carrying handle that allows the monitor to be operated while being carried. The manufacturer also provides bed-rail and pole-stand mounting options.
This makes the T1 particularly suited to situations where patients need monitoring while being moved through a hospital.
The BeneView T1 uses a rechargeable lithium-ion battery. Mindray states that the built-in battery supports up to 5 hours of continuous monitoring, while the operator manual provides the battery and hardware specifications.
Actual operating time can vary depending on battery condition, configuration and usage.
A key feature of the Mindray BeneView T1 patient monitor is its ability to maintain continuity of monitoring information during patient movement.
Mindray states that when the T1 is removed from the BeneView monitor, it can automatically connect to the Hypervisor VI central monitoring system through integrated Wi-Fi. When the T1 is returned to the BeneView monitor, information collected during transport can be synchronized with the central monitoring system.
This functionality depends on the compatible monitoring infrastructure and network configuration being available.
The BeneView T1 can store patient monitoring information for later review.
Mindray specifies up to 48 hours of full-disclosure waveforms and data, up to 120 hours of graphic and tabular trends, and up to 1,000 NIBP measurements.
The exact storage and review capabilities should be confirmed against the installed software and configuration.
The Mindray BeneView T1 monitor can be used for patient monitoring in:
For ICU patients who require monitoring while being transferred to imaging, theatre, emergency care or other hospital departments, where the configured parameters are appropriate.
The monitor can accompany patients between theatre, recovery and other care areas.
Its portable design can support monitoring during patient movement within emergency-care environments.
The T1's compact form and battery operation make it suitable for transport applications when the appropriate configuration and mounting accessories are available.
The current Kenyan listing identifies NICU among potential application areas. Appropriate patient-category settings, sensors and accessories should be used for neonatal or pediatric patients.
When connected to the appropriate BeneView system, the T1 can operate as part of a bedside patient-monitoring setup.
The monitor should be operated by trained healthcare professionals according to the manufacturer's instructions and the healthcare facility's procedures.
A general workflow includes:
Confirm that the monitor and battery are ready for use.
Select the appropriate patient category.
Connect the required ECG accessories.
Apply the appropriate SpO₂ sensor.
Select and position the correct NIBP cuff.
Connect temperature, IBP or CO₂ accessories where required.
Confirm that waveforms and numerical values are displayed correctly.
Set appropriate alarm limits according to clinical requirements.
Check battery status before transport.
Confirm network connectivity where central monitoring is required.
During transport, secure the monitor using the appropriate handle or mounting system.
After transport, reconnect the T1 to the compatible BeneView system when required.
Clean and maintain the equipment according to the manufacturer's instructions.
Before purchasing a Mindray BeneView T1, confirm:
Transport-monitor requirements
Bedside-monitor compatibility
Required physiological parameters
ECG configuration
SpO₂ technology
NIBP cuff requirements
Temperature probes
IBP requirements
EtCO₂ requirements
12-lead ECG requirements
Cardiac-output or PiCCO requirements
Battery condition and availability
Docking station
Network connectivity
Central-monitoring compatibility
Mounting accessories
Included cables and sensors
Warranty and technical support
For hospital procurement, request a complete configuration and accessory list rather than purchasing solely by model name.
Depending on the configuration, accessories may include:
ECG cable
ECG electrodes
SpO₂ sensor
NIBP cuff
Temperature probe
IBP accessories
CO₂ accessories
Rechargeable battery
T1 handle
AC adapter
Compatible networking accessories
The manufacturer's documentation identifies separate T1 docking, handle, battery and CO₂/IBP module components.
The exact accessories included with a Kenyan supplier's package should be confirmed before ordering.
The current Maesio Pharmaceuticals Kenya listing shows the Mindray BeneView T1 – Transport & Bedside Monitor at KSh 450,000.
This should be treated as a current supplier-specific listing price, rather than a fixed market price for every BeneView T1 configuration.
The final quotation can vary according to monitoring modules, docking station, accessories, battery condition, warranty, service arrangements and other supply terms.
The Mindray BeneView T1 is a compact patient-monitoring device that can function as a transport monitor and as a module within a compatible BeneView bedside monitoring system.
Yes. Mindray specifically designed the BeneView T1 for patient transport and describes it as a mobile monitoring solution between points of care.
Yes. It can operate as a multi-parameter module within a compatible BeneView bedside monitoring system and can be detached for transport.
Depending on configuration, the T1 can monitor ECG, SpO₂, NIBP, temperature, IBP and EtCO₂. Additional capabilities can include 12-lead ECG, cardiac output and PiCCO.
Mindray states that the built-in lithium-ion battery supports up to 5 hours of continuous monitoring. Actual runtime depends on battery condition and operating configuration.
The current Maesio Pharmaceuticals listing shows KSh 450,000 for the Mindray BeneView T1 Transport & Bedside Monitor. The final price should be confirmed with the supplier based on the exact configuration and accessories.
Yes, EtCO₂/CO₂ monitoring is available through an appropriate configuration or module. Confirm that the required CO₂ module and accessories are included in the quoted package.
Yes, IBP is supported through the appropriate module/configuration. The BeneView T-series documentation identifies an IBP module for the system.
Yes. Mindray describes integrated Wi-Fi connectivity that can allow the T1 to communicate with the Hypervisor VI central monitoring system when configured within the appropriate infrastructure.
Mindray specifies the patient-monitor unit at less than 1 kg, making it suitable for portable patient monitoring.
Important: There is a discrepancy between the current Kenyan supplier listing, which specifies an 8-inch touchscreen, and Mindray's operator manual/product documentation, which specifies a 5-inch host display. Confirm the exact hardware configuration being supplied before purchase.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
