The Volkmann Scoop is a specialized orthopedic surgical instrument designed for controlled scraping, scooping, and removal of selected bone tissue, fibrous material, and surgical debris during clinically indicated procedures.
Also known as a Volkmann bone curette, Volkmann bone scoop, orthopedic bone curette, surgical bone scoop, or Volkmann sharp spoon, this instrument is commonly used in orthopedic surgery, bone debridement, and selected reconstructive and general surgical procedures.
A conventional Volkmann Scoop consists of a slender surgical shaft, a manually operated handle, and an oval or spoon-shaped working tip. The working edge is usually sharp in models intended for bone curettage, although other edge configurations may be available.
The scoop-shaped tip allows a trained surgeon to mechanically remove selected tissue or material from an appropriate bone surface or cavity.
The most common single-ended Volkmann bone curettes are manufactured from reusable surgical stainless steel. Double-ended versions are also available.
Oval or spoon-shaped working tip.
Sharp curettage edge on designated models.
Slender shaft for appropriate surgical access.
Manual handle for controlled operation.
Different scoop widths.
Single-ended and double-ended configurations.
Surgical stainless steel construction.
Reusable design where manufacturer-approved.
Compatibility with validated cleaning and sterilization.
Different overall lengths depending on the manufacturer.
Established manufacturers commonly list a 17 cm Volkmann bone curette in several scoop sizes, from approximately 2.8 mm to 14.5 mm. KLS Martin also lists a reusable 17 cm Volkmann curette with an oval working end and a hollow handle.
The Volkmann scoop price in Kenya depends on the scoop size, overall length, single-ended or double-ended design, material quality, manufacturer, and institutional purchasing requirements.
A Kenyan medical equipment supplier, Cavash Medical Supplies, lists a Volkmann Bone Curette 17 cm on a price-on-request basis. The supplier also lists a 22 cm double-ended model.
However, a verified public Kenyan retail price for the exact Volkmann Scoop requested could not be established.
Product Configuration
Price Availability
Volkmann Bone Scoop 17 cm
Request quotation
Volkmann Bone Curette Single-Ended
Depends on scoop dimensions and manufacturer
Volkmann Bone Curette Double-Ended
Depends on overall length and working-end sizes
Volkmann Sharp Bone Scoop
Depends on edge design and steel quality
Volkmann Bone Curette Fig. 0–6
Depends on selected figure and tip width
Stainless Steel Orthopedic Bone Curette
Depends on manufacturer and finishing
Volkmann Scoop Set
Depends on included sizes and quantities
Concord Surgical lists a single-ended, 17 cm Volkmann Bone Curette at approximately US$65, with several spoon sizes available.
This is an international price, not a Kenyan retail quotation or Maesio Pharmaceuticals' selling price. Shipping, import charges, and product specifications may affect the total cost.
Buy Volkmann Scoop in Kenya from Maesio Pharmaceuticals Limited for hospitals, orthopedic surgical departments, operating theaters, and specialist healthcare facilities.
Product: Volkmann Scoop – Stainless Steel Orthopedic Bone Curette
Category: Orthopedic Instruments / Bone Curettes / Surgical Instruments
Material: Surgical stainless steel, depending on the selected model.
Working End: Oval or spoon-shaped curette tip.
Working Edge: Sharp or manufacturer-specified.
Length: Commonly 17 cm in standard single-ended patterns; verify the required model.
Scoop Size: Confirm the required figure number and tip width.
Handle: Solid, hollow, or manufacturer-specific.
Reusability: Confirm manufacturer labeling.
Sterility: Confirm sterile or nonsterile supply.
Application: Professional bone curettage and selected orthopedic surgical procedures.
Delivery: Nairobi and countrywide Kenya, with East African supply arrangements available by agreement.
Ordering Recommendation: Specify the overall length, number of working ends, scoop width, edge type, and manufacturer.
Browse available surgical instruments at https://www.maesiopharmaceuticals.co.ke/shop.
Healthcare institutions looking to buy Volkmann scoop in Nairobi should select an instrument based on the intended orthopedic procedure and approved hospital instrument specifications.
The Volkmann bone scoop is designed to assist with controlled removal of selected material from bone surfaces or cavities.
Orthopedic hospitals
Public referral hospitals
Private hospitals
Trauma and fracture surgery departments
Orthopedic operating theaters
Bone and joint specialist clinics
Reconstructive surgery departments
Selected general surgical departments
Medical teaching hospitals
Surgical training institutions
The exact instrument should be selected by the operating surgeon.
A bone curette scoop for sale in Kenya is a manually operated surgical instrument used for selected bone curettage procedures.
The scoop-shaped end is designed for controlled contact with appropriate bone surfaces or cavities.
Selected models feature a sharpened working rim for mechanical removal of suitable tissue or bone material.
Volkmann curettes are available in several numbered sizes.
The shaft provides access to suitable surgical sites.
Reusable versions commonly feature corrosion-resistant surgical stainless steel.
The instrument does not require electricity or batteries.
Manufacturer-approved models can be processed and returned to clinical service.
Different configurations are available depending on the procedure.
Maesio Pharmaceuticals Limited supplies orthopedic surgical instruments, medical equipment, surgical consumables, and hospital supplies to healthcare institutions throughout Kenya and East Africa.
Facilities looking for a Volkmann bone scoop supplier in Kenya should verify the exact instrument pattern rather than relying solely on the product name.
Explore orthopedic and surgical equipment through www.maesiopharmaceuticals.co.ke.
Exact Volkmann bone curette pattern.
Single-ended or double-ended construction.
Overall length.
Scoop figure number.
Scoop width.
Oval or round working end.
Sharp or blunt edge.
Handle construction.
Surgical stainless steel specification.
Manufacturer and catalog number.
Reusable status.
Sterility on supply.
Validated reprocessing instructions.
Quantity and packaging.
Warranty arrangements.
Delivery requirements.
An orthopedic bone curette is used for selected surgical procedures involving bone tissue or material within an appropriate surgical cavity.
The instrument may assist a surgeon in removing selected nonviable bone tissue or unwanted material.
A suitably specified curette may be used during selected surgical treatment of bone lesions.
The scoop may help prepare an appropriate surgical cavity according to the surgeon's plan.
Selected models may be used to remove fibrous material from suitable bone surfaces.
Bone curettes may form part of surgical instrument sets used during selected reconstructive procedures.
The instrument may be included in orthopedic, trauma, or specialist bone surgery trays.
Volkmann bone scoops may be used in supervised surgical training and simulation.
Clinical limitation: A Volkmann Scoop is not a universal bone-removal instrument. Its suitability depends on the patient's condition, bone quality, anatomical location, and the intended procedure.
Volkmann bone curettes are commonly identified using figure numbers such as 0000, 000, 00, 0, 1, 2, 3, 4, 5, and 6.
These numbers refer to the manufacturer's scoop-size range. They are not universal millimeter measurements, so the actual working-tip width must be confirmed.
The following examples are based on a 17 cm Volkmann oval bone curette range.
Figure Size
Example Scoop Width
Overall Length
Fig. 0000
2.8 mm
17 cm
Fig. 000
3.6 mm
Fig. 00
4.4 mm
Fig. 0
5.2 mm
Fig. 1
6.8 mm
Fig. 2
8.5 mm
Fig. 3
10 mm
Fig. 4
11.5 mm
Fig. 5
13 mm
Fig. 6
14.5 mm
These dimensions are published for selected Volkmann-pattern instruments. Other manufacturers may use different numbering or measurements.
Manufacturer
Reference
Description
KLS Martin
23-304-20-07
Volkmann Fig. 00, oval, 17 cm, 4.5 mm working width
23-304-10-07
Volkmann Fig. 0, oval, 17 cm, 5.2 mm working width
SURTEX
OR-526-01
Volkmann Fig. 1, oval, 17 cm, 6.8 mm scoop
OR-526-02
Volkmann Fig. 2, oval, 17 cm, 8.5 mm scoop
OR-526-03
Volkmann Fig. 3, oval, 17 cm, 10 mm scoop
OR-526-04
Volkmann Fig. 4, oval, 17 cm, 11.5 mm scoop
These examples demonstrate that even closely related figure sizes may differ slightly between manufacturers.
A single-ended model has one scoop-shaped working tip and a handle at the opposite end.
It is a common configuration for a 17 cm Volkmann bone curette.
A double-ended instrument has two working tips, which may be the same shape or have different scoop dimensions.
Manufacturers offer double-ended Volkmann curettes in different lengths, including approximately 13, 17, 20, and 22 cm.
A sharp curette has a cutting rim intended for designated bone or tissue removal tasks.
A blunt scoop is a different edge configuration. It should not be assumed suitable for procedures requiring a sharp curette.
The oval cup is a widely recognized Volkmann pattern.
Some manufacturers, including KLS Martin, offer models with hollow handles.
Other patterns feature a solid metal gripping handle.
An orthopedic department may procure several figure sizes as a complete assortment.
The set contents, number of instruments, and packaging must be specified individually.
A critical distinction is that Volkmann Bone Scoops and Volkmann Uterine Curettes are not the same instrument.
Feature
Volkmann Bone Scoop
Volkmann Uterine Curette
Main Specialty
Orthopedic surgery
Gynecology
Primary Function
Selected bone and associated tissue curettage
Selected uterine curettage
Typical Design
Oval bone scoop
Gynecological curette tip
Common Example Length
25–28 cm in selected models
Tip Dimensions
Numbered bone curette sizes
Gynecological instrument sizes
Material
Commonly surgical stainless steel
Reusable
Selected models
Directly Interchangeable
No
A hospital ordering a Volkmann Scoop for orthopedic surgery should not automatically receive a Volkmann uterine curette.
Bone Rongeur
Working End
Spoon-shaped curette
Opposing biting jaws
Main Action
Scraping and scooping
Cutting or biting bone
Handle
Manual curette handle
Forceps-like handles
Typical Use
Selected bone cavity and surface curettage
Selected bone trimming or removal
Available Sizes
Various scoop widths
Different jaw dimensions
Interchangeable
A rongeur removes bone through a biting action, while a Volkmann curette uses a scooping or scraping action.
Volkmann Scoop
Bone Chisel
Working Tip
Oval scoop
Flat cutting blade
Scraping
Cutting or shaping
Mallet Use
Not normally intended
Some chisels are designed for mallet use
Working Sizes
Scoop width
Blade width
Main Application
Selected bone curettage
Selected bone cutting
Direct Substitute
A Volkmann Scoop should not be struck with a surgical mallet unless the manufacturer explicitly designs it for such use.
An osteotome is primarily designed for controlled bone cutting or shaping.
The Volkmann Scoop uses a spoon-shaped working end for curettage.
These instruments have different mechanical functions and are not interchangeable.
Cobb Bone Curette
Named Pattern
Volkmann
Cobb
Commonly oval scoop
Manufacturer-specific curette
Common Length
17 cm in many patterns
Longer patterns available
Scoop Sizes
Multiple figures
Multiple widths
Application
Selected orthopedic or specialist bone procedures
Not automatic
The required instrument must match the approved surgical inventory.
Daubenspeck and Volkmann curettes are both named surgical curette families.
Their working-tip geometry, shaft design, length, and size range may differ.
A surgeon requesting a Volkmann curette should not receive a Daubenspeck model unless the substitution is clinically approved.
The Volkmann name also appears on surgical retractors.
Volkmann Retractor
Instrument Category
Bone curette
Surgical retractor
Oval spoon or scoop
Hook or pronged retraction end
Scraping or curettage
Tissue retraction
Common Specialty
Orthopedics
General and orthopedic surgery
This distinction is important because both instruments may appear in the same orthopedic supply catalog.
The working cup should have the intended oval profile and manufacturer's specified dimensions.
Sharp versions should have an intact, properly manufactured cutting rim.
The shaft should resist unintended bending during normal approved use.
A well-designed handle supports controlled manual manipulation.
Reusable models should be manufactured from suitable surgical instrument materials.
Appropriate finishing supports cleaning and inspection.
Hospitals can select the scoop width that matches their procedural requirements.
Manufacturer-approved instruments can be cleaned and sterilized repeatedly.
Before purchasing, confirm:
Instrument identity: Volkmann bone scoop, not uterine curette or retractor.
Clinical application: Orthopedic bone curettage or another approved use.
Working-tip shape: Oval or another specified profile.
Scoop size: Obtain the required figure number.
Actual tip width: Confirm dimensions in millimeters.
Overall length: Verify the manufacturer's measurement.
Number of working ends: Single or double.
Edge type: Sharp or blunt.
Handle design: Solid, hollow, or model-specific.
Material: Verify surgical stainless steel specification.
Surface finish: Check smoothness and absence of defects.
Manufacturer: Confirm brand and catalog number.
Reusable status: Check manufacturer labeling.
Sterility: Verify supply condition.
Reprocessing: Obtain validated instructions.
Packaging: Confirm individual instrument or assorted-size set.
Availability and delivery: Confirm procurement requirements.
Reusable Volkmann bone curettes must undergo appropriate reprocessing between patient uses.
Follow the manufacturer's validated instructions, paying particular attention to the scoop's inner surface, cutting rim, shaft, and handle.
The instrument should be inspected for retained material before further processing.
Check for:
Blunt or chipped cutting edges.
Bent shafts.
Corrosion or pitting.
Cracks or structural damage.
Deformed scoop tips.
Rough working surfaces.
Damaged handles.
Residual contamination.
Many reusable stainless steel Volkmann curettes support steam sterilization according to their manufacturers' validated instructions.
For example, KLS Martin identifies its 17 cm Volkmann bone curette as reusable and supplied nonsterile. The appropriate reprocessing method must follow the product's instructions for use.
Cutting-edge repair or sharpening should only be performed according to authorized instrument-servicing procedures.
Incorrect sharpening may change the scoop geometry or create unsafe edges.
Store instruments in suitable surgical trays or protective packaging that prevents damage to the working tip.
Remove the curette from service if the working edge is damaged, corrosion develops, or the instrument cannot be safely reprocessed.
A verified public Kenyan retail price for the exact Volkmann Scoop was not established. A Kenyan medical supplier lists a 17 cm model on a price-on-request basis.
You can inquire through Maesio Pharmaceuticals Limited for Volkmann bone scoops and other orthopedic surgical instruments.
It is a surgical bone curette featuring a spoon-shaped working tip used during selected bone curettage procedures.
Yes. The names are often used interchangeably for the Volkmann bone curette pattern.
A Kenyan surgical instrument supplier lists both a 17 cm Volkmann bone curette and a longer double-ended configuration.
It is used for selected scraping and removal of bone or associated tissue during appropriate surgical procedures.
Many reusable models are manufactured from surgical stainless steel.
A common single-ended version measures 17 cm, although other lengths are available.
Selected manufacturers offer sizes from Fig. 0000 to Fig. 6.
Yes. Some manufacturers list a 17 cm Volkmann bone curette with a 10 mm scoop, often designated Fig. 3.
Yes. Single-ended versions are common.
Yes. Manufacturers offer double-ended configurations with different scoop shapes and lengths.
Many conventional bone curettes have a sharp scoop rim, but the exact edge design depends on the model.
Yes. It is a recognized instrument in selected orthopedic surgical procedures.
Selected bone curettes may be used during appropriate surgical debridement.
It may be used for selected bone lesion curettage procedures according to the surgeon's assessment.
Yes. The working end is designed for selected mechanical removal of bone or associated material.
No. Volkmann bone and uterine curettes are distinct instruments intended for different applications.
No. A curette scrapes or scoops, while a rongeur uses cutting jaws.
No. They have different working ends and mechanical functions.
Not unless the exact manufacturer specifically approves that method.
Many stainless steel models are approved for repeated use following validated reprocessing.
Many reusable stainless steel models are steam-sterilizable according to the manufacturer's instructions.
Not always. Some manufacturer models are supplied nonsterile.
Follow the manufacturer's validated cleaning instructions, particularly around the inner scoop and working rim.
Yes. Wear or damage may affect a sharp curette's working edge.
Servicing should only follow the manufacturer's recommendations and appropriate authorized procedures.
A Volkmann Scoop is used for curettage, while a Volkmann Retractor is used for surgical tissue retraction.
Yes. Several manufacturers offer assorted-size bone curette sets.
Yes. Healthcare institutions can request quotations based on required sizes and quantities.
They may be used in appropriately supervised surgical education and simulation.
Yes. Incorrect use may damage bone, surrounding soft tissue, vessels, or other anatomical structures.
No. It is an invasive surgical instrument intended for qualified professionals.
Maesio Pharmaceuticals supplies medical products throughout Kenya and can arrange deliveries to East African destinations by agreement.
Confirm the exact instrument pattern, working-tip width, overall length, edge type, material, reusable status, manufacturer, and packaging.
Specification
Details
Product Name
Alternative Names
Volkmann Bone Curette, Volkmann Bone Scoop, Volkmann Sharp Spoon, Orthopedic Bone Curette
Product Category
Orthopedic Surgical Instruments / Bone Curettes
Instrument Pattern
Product Type
Manual bone curettage instrument
Selected scraping and removal of bone or associated tissue
Oval or spoon-shaped scoop
Working Edge
Commonly sharp; verify model
Scoop Size
Manufacturer dependent
Example Figure Range
0000 to 6
Example Scoop Widths
2.8–14.5 mm in selected ranges
Common Overall Length
Alternative Lengths
Shaft Design
Slender surgical shaft
Solid, hollow, or manufacturer-specific
Number of Working Ends
Single or double, depending on model
Main Material
Surgical stainless steel
Exact Steel Grade
Confirm selected manufacturer
Surface Finish
Yes, for manufacturer-approved models
Single-Use
Not assumed
Sterile on Supply
Confirm manufacturer labeling
Steam Sterilization
According to validated manufacturer instructions
Cleaning
Manufacturer-approved surgical instrument reprocessing
Electrical Requirement
None
Battery Requirement
Typical Clinical Applications
Selected orthopedic bone curettage and debridement procedures
Related Specialties
Orthopedics, trauma surgery, and selected general surgical disciplines
Intended Users
Trained and authorized surgical professionals
Home Use
Not appropriate
Packaging
Individual instrument or specified size set
Confirm selected product
Catalog Number
Confirm selected model
Country of Manufacture
Confirm supplier documentation
Conformity Documentation
Request applicable manufacturer records
Warranty
Confirm supplier terms
Bulk Procurement
By quotation
Stock Availability
Subject to confirmation
Delivery
Nairobi, countrywide Kenya, and East Africa by arrangement
Specification note: The listed sizes are examples from established Volkmann bone curette ranges. They do not confirm the exact scoop width, manufacturer, material specification, or length of Maesio's available product.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
