The Mindray WATO 35 Anaesthetic Machine, commonly identified as the Mindray WATO EX-35 Anaesthesia Machine, is an advanced medical anaesthesia workstation designed to support controlled delivery of inhalational anaesthetic agents, mechanical ventilation, and respiratory monitoring during surgical procedures.
Also known as the Mindray WATO EX-35 Anesthesia Machine, Mindray WATO 35 Anaesthesia Workstation, WATO 35 Anaesthesia Ventilator, or Mindray WATO EX-35 Inhalation Anaesthesia System, this equipment combines an integrated ventilator, breathing system, medical gas delivery assembly, anaesthetic vaporizer mounting, and respiratory monitoring within a mobile operating theatre workstation.
The WATO EX-35 features a 10.4-inch full-colour touchscreen with an intuitive operating interface, allowing anaesthesia professionals to adjust ventilation modes, review respiratory parameters, and access monitoring information.
Its integrated ventilator supports multiple ventilation modes, including Volume-Controlled Ventilation (VCV), Pressure-Controlled Ventilation (PCV), Synchronized Intermittent Mandatory Ventilation (SIMV-VC and SIMV-PC), and Pressure Support Ventilation (PSV). These modes provide flexibility for controlled and assisted respiratory support.
The machine is designed for a range of patient populations, including adults, paediatric patients, and infants within the approved technical and clinical limits of the selected configuration.
Its breathing system incorporates automatic compliance compensation and fresh gas compensation to help maintain the selected ventilation parameters under appropriate operating conditions.
The WATO EX-35 also features a heated breathing system designed to reduce moisture condensation within the system and support appropriate respiratory gas delivery.
Additional equipment features include an integrated CO₂ absorber, compatible anaesthetic vaporizer mounting, intelligent alarm notifications, and optional anaesthetic gas monitoring.
The workstation's ergonomic construction, accessible working surface, storage facilities, and mobile base make it suitable for appropriately equipped operating theatres.
Maesio Pharmaceuticals Limited provides healthcare facilities with a convenient platform for purchasing and enquiring about the Mindray WATO 35 Anaesthetic Machine and related anaesthesia equipment.
Integrated anaesthesia ventilator: Supports mechanical respiratory ventilation during general anaesthesia.
10.4-inch colour touchscreen: Provides an intuitive interface for respiratory settings, monitoring, and alarms.
Multiple ventilation modes: Supports VCV, PCV, SIMV-VC, SIMV-PC, PSV, and manual/spontaneous ventilation.
Adult, paediatric, and infant applications: Intended for manufacturer-approved patient populations.
Automatic compliance compensation: Helps compensate for breathing-system compliance during mechanical ventilation.
Fresh gas compensation: Supports consistent ventilator performance as fresh gas flow conditions change.
Heated breathing system: Helps reduce internal moisture condensation.
Integrated CO₂ absorber: Supports appropriate circle-system anaesthesia.
Dual-vaporizer mounting positions: Accommodates up to two approved agent-specific vaporizers.
Optional anaesthetic gas monitoring: Supports compatible agent monitoring modules.
Smart Alarm system: Provides detailed visual and audible information about specified operating conditions.
Ventilator drive gas auto-switch: Available as an option in applicable configurations.
Respiratory waveform display: Presents selected pressure, flow, and volume-related graphics.
Oxygen concentration monitoring: Supports monitoring of inspired oxygen concentration.
Backup battery system: Provides temporary operation during specified electrical power interruptions.
Mobile workstation: Features castors with brakes for appropriate theatre positioning.
Work surface and storage: Provides practical space for anaesthesia-related accessories.
Anaesthetic gas scavenging compatibility: Supports approved scavenging arrangements.
Exact installed features, optional modules, and accessories depend on the supplied configuration.
The Mindray WATO 35 anaesthesia machine price in Kenya depends on the workstation configuration, integrated ventilator capabilities, vaporizers, medical gas connections, monitoring modules, included accessories, warranty, installation, and technical support.
Different equipment packages may include different monitoring modules and anaesthetic vaporizer combinations.
Machine Configuration
The exact WATO EX-35 hardware revision and selected features determine the equipment package.
Integrated Ventilator
The ventilator's operating modes, supported patient populations, and adjustable respiratory parameters influence the complete specification.
Anaesthetic Vaporizers
The type and number of vaporizers included in the workstation package should be confirmed.
Monitoring Modules
Carbon dioxide monitoring, anaesthetic agent measurement, and other optional monitoring functions may require additional modules.
Medical Gas Connections
The facility may require oxygen, medical air, and nitrous oxide connections, depending on the selected configuration.
Breathing-System Accessories
The complete package may include breathing circuits, reservoir bags, flow sensors, CO₂ absorber accessories, and related components.
Battery Backup
Battery condition, replacement requirements, and operating specifications should be considered.
Installation and Commissioning
Correct installation includes appropriate medical gas connections, system testing, electrical checks, and clinical commissioning.
Warranty and After-Sales Support
Preventive maintenance, technical servicing, spare parts availability, and warranty coverage are important procurement considerations.
Buy or enquire about the Mindray WATO EX-35 Anaesthetic Machine through Maesio Pharmaceuticals Limited.
Product Name: Mindray WATO 35 Anaesthetic Machine
Alternative Name: Mindray WATO EX-35 Anaesthesia Workstation
Brand: Mindray
Model: WATO EX-35
Category: Anaesthesia Equipment / Operating Theatre Equipment
Product Type: Anaesthesia Workstation with Integrated Ventilator
Primary Function: Inhalational anaesthesia delivery and mechanical ventilation
Display: 10.4-inch colour touchscreen
Ventilation Modes: VCV, PCV, SIMV-VC, SIMV-PC, PSV, Manual/Spontaneous
Patient Applications: Adult, paediatric, and infant within approved limits
Vaporizers: Two mounting positions; inclusion dependent on quotation
Breathing System: Integrated heated circle breathing system
Anaesthetic Gas Monitoring: Optional
Ventilator Drive Gas Auto-Switch: Optional
Supplier: Maesio Pharmaceuticals Limited
Delivery: Nairobi and other locations in Kenya, subject to order arrangements
View the Mindray WATO 3 Anaesthetic Machine Product Page or browse the Maesio Pharmaceuticals Online Shop.
Healthcare facilities looking to buy the Mindray WATO 35 in Nairobi should select an equipment configuration appropriate for their surgical workload, patient population, anaesthesia requirements, and medical gas infrastructure.
The workstation is designed to support respiratory ventilation and inhalational anaesthetic delivery during appropriate surgical procedures.
General surgical hospitals.
Private hospitals.
Referral hospitals.
Maternity operating theatres.
Orthopaedic surgical departments.
ENT operating theatres.
Urological surgical units.
Paediatric surgical theatres.
Specialist surgical centres.
Medical teaching hospitals.
Appropriately equipped day surgery facilities.
Emergency operating theatres.
VCV delivers mechanical breaths according to the selected tidal volume and respiratory parameters. It supports controlled ventilation during appropriate anaesthesia procedures.
PCV provides breaths according to a set inspiratory pressure. The resulting tidal volume depends on the patient's respiratory mechanics and selected settings.
SIMV-VC combines volume-controlled mandatory breaths with opportunities for spontaneous patient breathing.
SIMV-PC delivers synchronized mandatory breaths using pressure-control settings.
Pressure support assists qualifying patient-triggered breaths and may be used during suitable spontaneous breathing phases.
The workstation supports manual ventilation and appropriate spontaneous breathing arrangements through the integrated breathing system.
Parameter
WATO EX-35 Specification
Ventilator Type
Pneumatically driven, electronically controlled
Volume-Controlled Ventilation
VCV
Pressure-Controlled Ventilation
PCV
Synchronized Ventilation
SIMV-VC, SIMV-PC
Pressure Support
PSV with apnoea backup
Manual/Spontaneous Mode
Supported
Tidal Volume – Volume Mode
20–1,500mL
Tidal Volume – Pressure Mode
5–1,500mL
Respiratory Frequency
4–100 breaths/min
Inspiratory Pressure (Pinsp)
5–60cmH₂O
Pressure Limit
10–100cmH₂O
Pressure Support Setting
3–60cmH₂O
I:E Ratio
4:1 to 1:8
Inspiratory Time
0.2–5 seconds
Flow Trigger
0.5–15L/min
Pressure Trigger
−20 to −1cmH₂O
Inspiratory Pause
Off or 5–60%
Automatic Compliance Compensation
Circuit Leakage Compensation
These are equipment setting ranges, not recommended patient ventilation settings. All settings must be selected and monitored by qualified anaesthesia professionals.
The workstation supports controlled oxygen delivery through compatible medical gas connections.
Appropriate configurations support medical air supply as part of fresh gas delivery and ventilation.
Nitrous oxide delivery is available in suitable workstation configurations.
The WATO EX-35 provides two vaporizer mounting positions for approved, compatible vaporizers.
Depending on clinical requirements and the selected configuration, suitable agent-specific vaporizers may be available for sevoflurane, isoflurane, and other approved volatile anaesthetic agents.
The workstation incorporates a breathing system with a carbon dioxide absorber. A single-canister arrangement helps support circle-system anaesthesia.
An appropriate scavenging system can be provided as part of the installation, depending on the equipment configuration.
Component
Function
Anaesthesia Workstation Body
Houses the integrated equipment
Mechanical Ventilator
Provides controlled and assisted respiratory ventilation
10.4-inch Touchscreen
Displays ventilator settings, monitoring, and alarms
Medical Gas Flowmeters
Control fresh gas delivery
Vaporizer Mounting System
Holds compatible anaesthetic vaporizers
Breathing Circuit
Connects the workstation to the patient breathing system
CO₂ Absorber
Contains appropriate carbon dioxide absorbent
Heated Breathing System
Helps reduce moisture condensation
APL Valve
Provides adjustable pressure limitation during applicable manual ventilation
Reservoir Bag Connection
Supports manual breathing assistance
Oxygen Monitoring
Measures selected oxygen concentration parameters
Airway Pressure Monitoring
Displays respiratory pressure information
Ventilation Volume Monitoring
Displays measured respiratory volumes
Alarm System
Provides visual and audible warnings
Backup Battery
Provides temporary backup electrical power
Work Surface
Supports clinical preparation and organization
Storage Drawer
Provides space for accessories
Mobile Base
Supports operating theatre positioning
Lockable Castors
Allow controlled movement and secure positioning
General Surgery
Supports inhalational general anaesthesia and mechanical ventilation during appropriate surgical procedures.
Obstetrics and Gynaecology
Can be used in suitably equipped maternity and gynaecological operating theatres where general anaesthesia is indicated.
Orthopaedic Surgery
Provides anaesthesia delivery and ventilation capabilities for appropriate orthopaedic procedures.
Paediatric Surgery
The WATO EX-35 supports paediatric and infant ventilation within its manufacturer-defined limits. Appropriate circuits, monitoring, and professional clinical assessment remain essential.
ENT Surgery
May form part of an approved anaesthesia setup for ear, nose, and throat procedures.
Urological Surgery
Supports selected anaesthesia techniques requiring mechanical ventilation and inhalational agents.
Emergency Surgical Procedures
May be used in adequately equipped emergency operating theatres with the necessary gas supply, monitoring, and resuscitation resources.
The touchscreen interface provides detailed information about selected alarms and equipment conditions.
The workstation supports measurement of oxygen concentration within the breathing system.
Provides warnings for specified high and low airway pressure conditions.
Supports detection and warning of designated apnoea conditions.
Helps compensate for the compressible volume of the breathing system during ventilation.
Helps maintain appropriate ventilator performance across permitted fresh gas flow conditions.
Selected configurations support automatic switching between available ventilator drive gas supplies under specified conditions. This is an additional protection feature and does not eliminate the possibility of ventilation failure.
Provides temporary power during qualifying mains electricity interruptions, according to the supplied battery configuration and operating conditions.
Equipment alarms and backup systems do not replace direct clinical supervision, independent patient monitoring, or emergency ventilation resources.
Integrated Anaesthesia and Ventilation
Combines medical gas delivery, inhalational anaesthesia, and respiratory ventilation in one workstation.
Advanced Ventilation Modes
Supports controlled, synchronized, and pressure-supported ventilation techniques.
Intuitive Touchscreen
Provides accessible controls and respiratory monitoring information.
Suitable for Different Patient Populations
Supports adults, paediatric patients, and infants within approved equipment limits.
Helps reduce internal condensation during appropriate operating conditions.
Flexible Monitoring
Supports optional compatible gas analysis modules.
Dual Vaporizer Mounting
Allows configuration with two appropriate agent-specific vaporizers, subject to quotation and installation requirements.
Mobile Operating Theatre Design
Provides castors, storage, and a working surface for a practical clinical setup.
Before purchasing, confirm the exact equipment model, hardware revision, patient population, and included accessories.
Assess the required ventilation modes, available medical gas supply, anaesthetic vaporizer configuration, gas monitoring, and the facility's electrical infrastructure.
Request a complete equipment packing list and verify the following:
Exact WATO EX-35 model and serial identification.
Ventilator modes and adjustable parameters.
Number and type of installed vaporizers.
Medical gas connections.
Breathing circuits and reservoir bags.
CO₂ absorber and accessories.
Oxygen monitoring components.
EtCO₂ and anaesthetic agent monitoring.
Patient monitor inclusion.
Battery backup.
Installation and commissioning.
User training.
Warranty and maintenance support.
Quotation Item
Details to Confirm
Equipment
Mindray WATO EX-35 Anaesthesia Machine
Brand
Mindray
Model
WATO EX-35
Quantity
Required number of workstations
Ventilator
Supported ventilation modes
Touchscreen
10.4-inch display
Vaporizers
Number, type, and inclusion
Medical Gas Supply
Required gas connections and hoses
Breathing System
Included configuration
Included canister and accessories
Patient Breathing Circuits
Required configurations
Gas Monitoring
Optional AG and EtCO₂ modules
Patient Monitor
Included or separately supplied
Gas Scavenging
Included or separately required
Battery
Included configuration and condition
Installation
Equipment commissioning
Training
Clinical and technical user training
Warranty
Coverage and duration
Maintenance
Servicing and spare parts
Delivery
Nairobi or other Kenyan location
The Mindray WATO EX-35 anaesthesia workstation must be installed and commissioned by qualified personnel.
Before clinical use, appropriate checks should cover medical gas supplies, breathing circuit integrity, ventilator operation, oxygen monitoring, vaporizers, alarms, and battery backup.
The heated breathing system and reusable breathing accessories should be cleaned and reprocessed according to the applicable manufacturer instructions. Not every component is suitable for autoclaving.
Routine preventive maintenance should include inspection of gas connections, ventilator components, sensors, breathing-system seals, alarm functions, and electrical safety.
Clinical safety: The WATO EX-35 is a life-supporting medical device intended for use by qualified anaesthesia professionals. Suitable patient monitoring, backup ventilation, emergency airway equipment, and resuscitation resources must be available.
What is the Mindray WATO 35 Anaesthesia Machine?
It is an integrated anaesthesia workstation designed for inhalational anaesthesia, mechanical ventilation, and respiratory monitoring during surgical procedures.
What is the Mindray WATO 35 Anaesthesia Machine price in Kenya?
The price depends on the equipment configuration, vaporizers, monitoring modules, included accessories, installation, and warranty arrangements.
Where can I buy a Mindray WATO 35 in Nairobi?
You can order or enquire about the Mindray WATO 35 through Maesio Pharmaceuticals Limited.
What is the full model name of the WATO 35?
The commonly used model designation is Mindray WATO EX-35.
Does the WATO EX-35 have an integrated ventilator?
Yes. It includes a pneumatically driven, electronically controlled anaesthesia ventilator.
What ventilation modes does the WATO EX-35 support?
It supports VCV, PCV, SIMV-VC, SIMV-PC, pressure support, and manual/spontaneous ventilation.
Does the WATO EX-35 have a touchscreen?
Yes. The documented WATO EX-35 configuration features a 10.4-inch colour touchscreen.
Can the WATO 35 be used for adult patients?
Yes. It is designed to support adult ventilation within its approved operating limits.
Does the WATO EX-35 support paediatric patients?
Yes. The machine supports paediatric ventilation within its manufacturer-defined settings.
Can the WATO EX-35 be used for infant anaesthesia?
The documented ventilator supports infant applications, subject to appropriate breathing circuits, monitoring, and clinical assessment.
What is the tidal volume range of the WATO EX-35?
The documented specification lists 20–1,500mL in volume-controlled mode and 5–1,500mL in pressure-controlled mode.
Does the machine support pressure-controlled ventilation?
Yes. PCV is an available ventilation mode.
Does the WATO 35 support SIMV?
Yes. Both SIMV-VC and SIMV-PC are supported.
Does the WATO 35 support pressure support ventilation?
Yes. Pressure support ventilation is available with the appropriate ventilator configuration.
Does the machine have a heated breathing system?
Yes. The WATO EX-35 features an integrated heated breathing system.
Can the WATO 35 use sevoflurane?
Yes, with an approved compatible sevoflurane vaporizer.
Can the WATO 35 use isoflurane?
Yes, when fitted with a suitable agent-specific isoflurane vaporizer.
How many vaporizers can the WATO EX-35 accommodate?
The documented machine provides two vaporizer mounting positions. The number included in a purchase package must be confirmed.
Does the WATO EX-35 monitor oxygen concentration?
Yes. Oxygen concentration is among the monitored respiratory parameters.
Does the WATO 35 support EtCO₂ monitoring?
Yes, through an appropriate optional monitoring module.
Does the WATO EX-35 provide anaesthetic gas monitoring?
Compatible anaesthetic gas monitoring modules are available as an option.
What is the Smart Alarm system?
It is an alarm interface that displays information about relevant equipment and ventilation conditions.
Does the WATO 35 have battery backup?
Yes. Backup battery capability is included, with runtime dependent on the supplied configuration and battery condition.
Does the WATO EX-35 have a CO₂ absorber?
Yes. Its integrated breathing system supports carbon dioxide absorption.
Can the WATO EX-35 be used in maternity theatres?
Yes, when the workstation is appropriate for the patient and procedure and is used by qualified anaesthesia personnel.
Can the WATO 35 be used during general surgery?
Yes. It is designed for appropriate inhalational general anaesthesia procedures.
Does the WATO EX-35 require regular maintenance?
Yes. Preventive maintenance and equipment verification should follow the specified service schedule.
Can hospitals request a Mindray WATO 35 quotation?
Yes. Healthcare facilities can enquire through Maesio Pharmaceuticals Limited, specifying the number of machines, vaporizers, accessories, and monitoring requirements.
Is a patient monitor included with the WATO EX-35?
Not necessarily. A separate multiparameter patient monitor should be listed explicitly in the quotation.
What should I confirm before purchasing the WATO 35?
Confirm the exact model, ventilator modes, vaporizers, medical gas supply, monitoring functions, accessories, installation, and technical support.
Does Maesio Pharmaceuticals deliver outside Nairobi?
Yes. Delivery arrangements may be made for other locations in Kenya, subject to product availability and order requirements.
The following table describes a documented WATO EX-35 configuration. Exact features and included accessories depend on the selected equipment package.
Specification
Details
Product Name
Mindray WATO 35 Anaesthetic Machine
Full Model
Mindray WATO EX-35
Category
Anaesthesia Equipment
Equipment Type
Anaesthesia Workstation
Primary Function
Inhalational anaesthesia and ventilation
Patient Population
Adult, paediatric, infant
Yes
Ventilator Drive
Ventilation Modes
VCV, PCV, SIMV-VC, SIMV-PC, PSV, Manual/Spontaneous
Display
10.4-inch colour touchscreen
Tidal Volume – VCV
Tidal Volume – PCV
Inspiratory Pressure
Circuit Compliance Compensation
Leakage Compensation
Fresh Gas Compensation
Single-canister system
CO₂ Absorber Capacity
1.5L in documented configurations
Vaporizer Mounting Positions
Two
Vaporizer Inclusion
Confirm quotation
Gas Supply
Model-dependent O₂, air, and N₂O combinations
Oxygen Flush
25–75L/min in documented configurations
Tidal Volume Monitoring
Respiratory Frequency Monitoring
Minute Volume Monitoring
EtCO₂ Monitoring
Optional
Anaesthetic Agent Monitoring
Ventilator Drive Gas Auto-Switch
Anaesthetic Gas Scavenging
Smart Alarm System
Included; runtime configuration dependent
Power Supply
AC 100–240V in documented configurations
Integrated
Storage
Integrated drawer
Castors
Four braked castors
Dimensions
Approximately 1410 × 945 × 690mm including breathing system, documented configuration
Weight
Less than 145kg excluding vaporizers and cylinders, documented configuration
Breathing Circuits
Confirm supplied quantity and type
Separately supplied unless included
Qualified commissioning
Manufacturer-defined
Confirm supplier terms
Stock Availability
Subject to confirmation
Supplier
Maesio Pharmaceuticals Limited
Nairobi and other Kenyan locations by arrangement
Specification note: Certain older WATO EX-35 revisions have different displays, equipment dimensions, and technical configurations. The 10.4-inch touchscreen specification applies to the documented updated model. Confirm the exact supplied revision before publishing final specifications or issuing a quotation.
The Mindray WATO EX-35 Anaesthetic Machine combines an integrated anaesthesia ventilator, touchscreen interface, multiple ventilation modes, heated breathing system, and advanced respiratory monitoring capabilities in one workstation.
Its configuration options support a range of general anaesthesia applications in appropriately equipped operating theatres.
For hospital administrators, anaesthesia professionals, biomedical engineers, and healthcare procurement teams, selecting the correct machine involves confirming ventilation performance, patient suitability, vaporizers, medical gas supply, monitoring modules, installation, and maintenance support.
Maesio Pharmaceuticals Limited provides healthcare facilities with access to anaesthesia equipment, operating theatre machines, surgical instruments, and medical supplies.
Order Online: Maesio Pharmaceuticals Online Shop
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
