If you are looking for the 3x2 manual oxygen manifold system price in Kenya, this configuration is designed to supply medical oxygen from multiple cylinders into a healthcare facility's central oxygen pipeline. The 3×2 arrangement provides grouped cylinder connections with manual changeover between the available cylinder banks.
The current Kenya listing for a 3 × 2 Manual Oxygen Manifold System is KSh 302,238. The listed system is designed for hospitals, clinics, health centres, maternity facilities, operating theatres, ICUs, HDUs and emergency departments.
The current listed price for the 3×2 Manual Oxygen Manifold System is:
This is the current listed product price and should not automatically be treated as a complete installed-project cost. Installation, medical gas pipeline connection, additional pigtails, cylinder brackets, pressure-regulation requirements, testing and commissioning may be quoted separately depending on the project.
For comparison, a current Kenya medical-gas catalogue lists a 2×2 manual medical gas manifold at KSh 214,542, while a 3×3 manual medical gas manifold is listed at KSh 302,238. These comparison products have different configurations and should not be treated as interchangeable with the 3×2 oxygen manifold.
Prices are current listing examples and may change with configuration and availability.
If you want to buy a 3×2 oxygen manifold system in Nairobi, specify the exact configuration when requesting a quotation.
The 3×2 system is intended to connect multiple oxygen cylinders to a central medical gas supply. The available product listing describes manual cylinder-bank changeover, pressure-controlled oxygen distribution and compatibility with central medical gas pipeline systems.
When ordering, confirm:
3×2 configuration
Medical oxygen compatibility
Number and type of cylinder connections
Pigtail requirements
Cylinder valve compatibility
Pressure-regulation specification
Pipeline outlet connection
Required flow capacity
Mounting requirements
Testing and commissioning requirements
Delivery and installation arrangements
A manual oxygen manifold system for sale in Kenya provides a centralized method of supplying medical oxygen from cylinders to a hospital or healthcare facility.
The manifold groups the cylinders into a controlled supply arrangement. The operator manually changes the active supply when required, making the system suitable where trained personnel are available to monitor cylinder pressure and manage cylinder-bank changes.
The listed 3×2 system is specifically described as a manual cylinder-bank configuration for medical oxygen supply and central pipeline distribution.
3×2 cylinder-bank configuration
Manual cylinder changeover
Medical oxygen application
Central pipeline connection
Pressure-controlled oxygen distribution
Multiple cylinder connections
Suitable for hospital installations
Straightforward operation and maintenance
Suitable for healthcare facilities requiring cylinder-based oxygen supply
The 3×2 oxygen manifold designation describes the cylinder-bank arrangement.
For this product, the 3×2 configuration is intended to group multiple oxygen cylinders into the manifold system, allowing the operator to manage the available cylinder supply manually.
The exact number of cylinders that can be connected should be confirmed from the supplied manifold drawing and configuration because manufacturers can use different naming conventions.
For procurement, it is better to specify the required number of cylinder connections rather than relying on the “3×2” label alone.
A manual oxygen manifold connects oxygen cylinders to a controlled medical gas distribution system.
The basic arrangement is:
Oxygen cylinders → manifold/pigtails → pressure regulation → medical oxygen pipeline → terminal outlets
The active cylinder bank supplies oxygen to the downstream pipeline. When the available supply needs to be changed, an appropriately trained operator manually switches the supply arrangement according to the manifold's operating procedure.
Medical oxygen manifolds can provide a more centralized supply arrangement than moving individual cylinders directly between patient-care areas. The Emergency Medicine Kenya Foundation describes oxygen manifolds as systems that provide stable, adjustable oxygen pressure and allow multiple patients to receive oxygen from one source.
When selecting a manual oxygen manifold supplier in Kenya, look for a supplier or medical gas integrator that can provide the complete technical configuration rather than only the manifold body.
A suitable supplier should be able to confirm:
Exact 3×2 configuration
Cylinder connection type
Pigtail specification
Pressure regulator details
Maximum flow capacity
Mounting arrangement
Required safety components
Testing and commissioning procedure
Applicable technical documentation
For larger hospital projects, medical gas companies in Kenya provide design, supply, installation, testing and maintenance services for central manifold and pipeline systems.
A medical oxygen manifold for hospitals in Kenya is part of the medical gas infrastructure used to distribute oxygen from a centralized cylinder supply.
The 3×2 configuration can be considered for facilities such as:
Hospitals
Health centres
Clinics
Maternity facilities
Operating theatres
Intensive care units
High-dependency units
Emergency departments
Hospital wards
The exact manifold capacity should be matched to the facility's oxygen demand and pipeline design. The current 3×2 product listing specifically identifies hospitals, clinics, maternity facilities, operating theatres, ICUs, HDUs and emergency departments as applications.
A 3×2 oxygen manifold quotation in Kenya should specify much more than the manifold price.
For a hospital project, request a quotation that clearly identifies:
This helps prevent a low equipment price from becoming an unexpectedly higher installed project cost.
The system can be used as part of medical oxygen supply infrastructure for:
Provides a cylinder-based oxygen source for a central medical gas pipeline.
Can form part of the oxygen supply infrastructure supporting surgical and anaesthesia areas.
Can supply oxygen into a central pipeline serving critical-care areas, subject to the facility's engineering design.
Centralized oxygen distribution can support multiple patient-care areas from the same supply infrastructure.
Can support medical oxygen distribution where a central pipeline system is installed.
The system can be considered where cylinder-based centralized oxygen supply is required.
A properly designed manifold can provide several operational advantages:
Centralized cylinder supply
Multiple-cylinder capacity
Controlled oxygen distribution
Easier cylinder-bank management
Connection to central medical gas pipelines
Reduced need to move individual cylinders through patient-care areas
Pressure monitoring
Manual control of cylinder supply
However, the suitability of a manual system depends on the facility's oxygen demand, staffing and requirement for supply continuity.
For facilities where uninterrupted supply and automatic changeover are critical, an automatic manifold may be more appropriate. The correct choice should be based on the facility's oxygen demand and medical gas engineering design.
Estimate the facility's expected peak oxygen demand before selecting the manifold.
Check the cylinder size, valve type and number of cylinders required.
The manifold's pressure regulation must match the downstream medical gas system.
Confirm the pigtail length, connector and pressure rating if pigtails are supplied or required.
If the hospital expects expansion, consider whether the 3×2 configuration provides adequate capacity.
Manual changeover requires trained personnel. Automatic changeover may be preferable where continuous supply is a priority.
For a hospital project, request pricing for installation, testing and commissioning where required.
Medical oxygen is an oxidizing gas and requires appropriate handling.
Use the manifold only for the gas for which it is designed.
Keep oxygen equipment away from flames, sparks and smoking.
Keep oil, grease and combustible contamination away from oxygen connections.
Secure oxygen cylinders correctly.
Inspect pigtails and connections before use.
Check the system for leaks.
Never force incompatible cylinder connections.
Do not modify pressure regulators or safety components.
Operate the manual changeover according to the manufacturer's procedure.
Installation and commissioning should be performed by qualified medical-gas personnel.
Follow applicable medical gas standards and facility procedures.
Important: Confirm the exact number of cylinder connections, pigtails, brackets, regulator configuration, pipeline connection and included accessories before placing a purchase order.
The current listed price for the 3×2 Manual Oxygen Manifold System is KSh 302,238. This is the listed equipment price; installation and project-specific accessories may be quoted separately.
A 3×2 manual oxygen manifold is available through medical gas equipment suppliers serving Nairobi and Kenya. For a hospital purchase, request a quotation specifying the exact 3×2 configuration and required accessories.
It refers to a specific cylinder-bank manifold configuration. The exact cylinder connection arrangement should be confirmed from the manufacturer's technical drawing before ordering.
No. The listed 3×2 system is a manual oxygen manifold, meaning cylinder-bank changeover is performed manually by the operator.
Yes. The listed system is designed to provide medical oxygen from multiple cylinders to a healthcare facility's central oxygen pipeline.
The current product description confirms the 3×2 manifold configuration but does not state that pigtails are included. Confirm the exact quotation and package contents before ordering.
The current product listing gives the equipment price of KSh 302,238 but does not establish that hospital installation, pipeline connection, testing or commissioning are included. Request an itemized quotation for a complete installation.
It can be part of an ICU oxygen supply system when correctly designed and connected to the facility's medical gas pipeline. The required capacity and supply continuity should be assessed by the medical gas engineer.
No. The cylinder valve connection, pressure rating and other specifications must be compatible with the manifold and pigtails.
The choice depends on oxygen demand, required supply continuity, staffing and facility design. A manual system requires operator intervention for cylinder-bank management, while automatic systems can provide automatic changeover.
For a 3×2 manual oxygen manifold system in Kenya, request a detailed quotation specifying the cylinder configuration, pigtails, regulators, pipeline connection, mounting requirements and whether installation and commissioning are required.
The current listed equipment price is KSh 302,238.
For hospitals, ICUs, operating theatres and other clinical facilities, the manifold should be selected, installed, tested and commissioned as part of the overall medical gas system by appropriately qualified personnel.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
