The Dosifix Giving Set 150ml Y-Injection Site Burette is a sterile, single-use, measured-volume intravenous administration set manufactured by B. Braun for professional infusion therapy.
Also known as the B. Braun Dosifix 150ml Burette Set, Dosifix IV Giving Set, Paediatric Burette Infusion Set, Dosifix Y-Injection Site Administration Set or B. Braun 150ml Volume Control Giving Set, this product is designed to assist healthcare professionals in administering measured volumes of intravenous fluids and compatible medications.
Intravenous infusion therapy requires appropriate control of the solution delivered to a patient.
This is particularly important for newborns, infants and children, where fluid management and prescribed infusion volumes require careful clinical attention.
The B. Braun Dosifix incorporates a calibrated 150ml dosage burette positioned within an intravenous administration system.
The burette acts as a measured-volume chamber, allowing clinicians to prepare a selected quantity of infusion solution rather than making the entire contents of a larger fluid container immediately available to the patient.
This configuration is useful in selected paediatric, neonatal and other clinical situations where measured-volume gravity infusion is required.
The Dosifix set has a transparent burette with fine graduation markings to support volume assessment.
It also incorporates an automatic shut-off float valve designed to reduce the risk of air entering the infusion line when the fluid level reaches the valve's operating threshold.
However, this safety feature does not eliminate the need for correct priming, proper clinical monitoring or appropriate infusion-system management.
The product includes a microdrip chamber calibrated at 60 drops per millilitre, based on the manufacturer's specified test conditions.
Its integral 15-micron fluid filter is designed to retain suitable particulate matter from the infusion fluid.
Two roller clamps provide manual flow-control points within the administration set.
The product also features a needle-access Y-injection site, allowing compatible medication administration according to the applicable clinical protocol.
A vented piercing spike, bacteria-tight air vent and Luer-Lock connection complete the principal administration features.
The set is intended for gravity infusion, not as a dedicated pump administration line.
The matching B. Braun product reference is 4037014.
Its manufacturer-specified set length is approximately 180cm, with PVC tubing measuring 3.0mm internally and 4.1mm externally.
The set is sterile, disposable and intended for use by trained healthcare professionals.
The Dosifix 150ml Y-Injection Site Burette Giving Set is suitable for appropriately prescribed intravenous therapy in hospitals, paediatric departments, neonatal units, maternity facilities and other clinical environments where measured-volume infusion is indicated.
Manufacturer: B. Braun.
Product Range: Dosifix.
Product Reference: 4037014.
Product Category: Intravenous Administration Sets.
Set Type: Measured-volume gravity infusion set.
Burette Capacity: 150ml.
Graduated Chamber: Provides visible volume markings.
Microdrip Factor: 60 drops/ml under manufacturer test conditions.
Fluid Filter: 15µm.
Automatic Shut-Off Float Valve: Designed to help limit air entry when the fluid reaches the valve.
Y-Injection Site: Needle-access configuration.
Burette Medication Addition Site: Allows appropriate medication admixture.
Vented Piercing Spike: Supports compatible fluid-container connection.
Bacteria-Tight Air Vent: Includes a protective closure.
Roller Clamps: Two.
Tubing Length: Approximately 180cm.
Tubing Inner Diameter: 3.0mm.
Tubing Outer Diameter: 4.1mm.
Connection: Male Luer-Lock.
Maximum Specified Pressure: 0.5 bar.
Tubing Material: PVC.
Sterilization: Ethylene oxide.
Reusability: Single-use.
Standard Manufacturer Sales Unit: 25 sets.
The Dosifix Giving Set 150ml price in Kenya depends on the product reference, included components, packaging quantity, manufacturer configuration and current availability.
Healthcare facilities should ensure that their quotation identifies the B. Braun Dosifix 150ml Y-Injection Site Gravity Giving Set, reference 4037014.
Manufacturer and Brand
The product is manufactured by B. Braun as part of its Dosifix intravenous administration range.
Burette Capacity
The set incorporates a graduated 150ml dosing chamber.
Injection Access Configuration
Different Dosifix variants may have needle-access or needle-free injection components.
Infusion Method
The standard 4037014 version is intended for gravity infusion. Pump-compatible Dosifix variants have different configurations.
Tubing Specifications
The set has a manufacturer-specified 180cm length and defined tubing dimensions.
Packaging Quantity
The manufacturer identifies 25 pieces per standard sales unit.
Institutional Procurement
Hospitals may request multiple sets for paediatric, neonatal and general infusion therapy departments.
Product Availability
Availability and supply arrangements may influence the final quotation.
Order Online: Maesio Pharmaceuticals Online Shop
The B. Braun Dosifix 150ml Y-Injection Site Giving Set is intended for healthcare facilities requiring measured-volume intravenous fluid administration.
Its 150ml burette, microdrip chamber and adjustable roller clamps support appropriate gravity infusion management.
Paediatric wards.
Neonatal intensive care units.
Newborn care units.
Maternity departments.
Hospital medical wards.
Surgical wards.
Emergency departments.
Paediatric outpatient treatment facilities.
Intensive care departments.
Hospitals providing prescribed intravenous therapy.
The graduated burette allows a prescribed fluid quantity to be placed in the dosing chamber.
Provides a measured-volume system for selected children requiring IV treatment.
May support prescribed infusion requirements in newborn care under appropriate clinical supervision.
The injection access points provide routes for administering compatible medications according to approved procedures.
The roller clamps allow manual adjustment of fluid flow during gravity administration.
The 15µm filter is designed to retain suitable particulate matter.
The float valve is designed to interrupt flow when the burette reaches its shut-off condition.
The Dosifix set is connected to a compatible intravenous fluid container through its piercing spike.
The administration system includes a transparent calibrated chamber that holds a measured quantity of solution.
A clinician determines the appropriate fluid volume according to the prescribed treatment.
The burette provides a visible measurement reference for monitoring that volume.
The roller clamps allow appropriate management of the gravity infusion pathway.
The microdrip chamber provides a manufacturer-specified drop factor of 60 drops/ml under defined test conditions.
The integral fluid filter forms part of the drip chamber assembly.
The Y-injection site provides an additional access point for compatible clinical use.
The administration set terminates in a male Luer-Lock connection for an appropriate vascular access device or extension line.
The automatic float valve is designed to help reduce air movement into the distal administration line when its operating condition is reached.
Nevertheless, the device must be properly prepared, primed and monitored by trained healthcare personnel.
A dosage burette is a graduated chamber incorporated into an IV administration system.
Its purpose is to provide a controlled reservoir of infusion fluid.
For example, the chamber can be used when a clinician needs to make only a specified amount of fluid available for a prescribed treatment.
The chamber's maximum rated capacity is 150ml.
This does not mean every patient should receive 150ml or that the full chamber must always be filled.
The required volume depends on the patient's clinical prescription.
The Dosifix 4037014 has a nominal drop factor of 60 drops per millilitre.
This is commonly described as a microdrip system.
A drop factor helps clinicians estimate a gravity infusion rate by relating the number of drops to the fluid volume.
However, actual drop formation and gravity flow can vary with fluid properties, temperature, system height and other clinical conditions.
Drop counting is not equivalent to electronic volumetric pump control.
The manufacturer-specified factor must be used together with the institution's approved infusion procedures and appropriate monitoring.
The supplied package should be checked for the exact article reference and current manufacturer instructions.
May support measured-volume fluid administration in appropriately selected paediatric patients.
Can be used for suitable neonatal intravenous therapy when prescribed and monitored by trained clinicians.
May support selected medication administration where a measured-volume dosing chamber is appropriate.
Provides a gravity infusion option for patients requiring controlled volumes.
Suitable for selected situations where limiting the amount of fluid immediately available in the chamber is clinically useful.
The two products should not be substituted without confirming the prescribed infusion system.
Important: These are different Dosifix versions. Do not assume that features of Dosifix SafeSet are present in the standard gravity Dosifix 4037014.
Helps limit the quantity of fluid available in the dosing chamber.
Assist visual volume assessment during prescribed infusion therapy.
Provides a nominal 60 drops/ml factor for appropriate gravity infusion monitoring.
Designed to reduce the likelihood of air continuing into the downstream tubing when the valve reaches its shut-off condition.
Provide separate flow-control points.
Includes a 15µm filter within the administration set.
Provides a Y-site for clinically appropriate medication administration.
Supports attachment to compatible infusion devices.
Store unopened Dosifix sets according to B. Braun's labelled storage conditions.
Protect the packaging from moisture, contamination and physical damage.
Confirm the correct manufacturer article before use.
Inspect the sterile barrier.
Verify the expiry date and batch number.
Do not use the set if its sterile packaging is damaged.
Prepare the system according to the manufacturer's instructions.
Do not reuse or resterilize the administration set.
Dispose of contaminated equipment according to appropriate healthcare waste procedures.
The Dosifix Giving Set 150ml is a medical device intended for professional intravenous therapy.
It must be used by appropriately trained healthcare personnel.
A burette is not an electronic infusion pump and should not be treated as an automatic guarantee of accurate infusion delivery.
The float valve is a supplementary safety feature and does not remove the need for careful monitoring.
Incorrect preparation, unrecognized air in the system, inappropriate fluid administration or disconnection can cause serious patient harm.
Infusion rates and volumes must follow the prescribed treatment plan.
Medication admixtures must be assessed for compatibility, stability and clinical suitability.
The 15µm filter is a particulate filter; it should not be represented as a bacterial sterilizing filter.
The standard 4037014 version is intended for gravity infusion.
Do not assume compatibility with Infusomat pumps.
The latex content of the particular regional injection-site configuration should be confirmed from the supplied manufacturer's label and current instructions before use in patients with relevant allergies.
The device is sterile and single-use.
What is Dosifix Giving Set 150ml Y-Injection Site Burette?
It is a B. Braun sterile measured-volume IV administration set with a 150ml burette and needle-access Y-injection site.
What is the Dosifix Giving Set 150ml price in Kenya?
The price depends on product availability, packaging and institutional order quantity.
Where can I buy Dosifix Burette Giving Set in Nairobi?
You can request the product through Maesio Pharmaceuticals Limited.
Who manufactures Dosifix?
Dosifix is manufactured by B. Braun.
What is the manufacturer's reference?
The matching standard gravity infusion model is 4037014.
What is the burette capacity?
The dosing chamber has a capacity of 150ml.
What is the main purpose of a burette giving set?
It allows a measured quantity of fluid to be made available for prescribed intravenous administration.
Is Dosifix suitable for paediatric infusion?
Yes. B. Braun identifies paediatric and neonatal applications among its primary uses.
Can Dosifix be used in neonatal care?
It may be used for appropriate prescribed neonatal infusion therapy under professional supervision.
What is the drop factor?
The manufacturer specifies 60 drops per millilitre.
Does it have a Y-injection site?
Yes. The specified version has a needle-access Y-site.
Is the Y-injection site needle-free?
No. The standard reference 4037014 has needle-based injection access.
Does it contain a fluid filter?
Yes. It includes a 15µm fluid filter.
What does a 15µm filter do?
It is designed to retain suitable particulate matter; it is not a sterilizing filter.
Does Dosifix include an automatic shut-off valve?
Yes. It incorporates a float-based shut-off feature.
Does the valve eliminate air embolism risk?
No. Correct preparation and monitoring remain essential.
How many roller clamps are included?
The set contains two roller clamps.
What is the tubing length?
The article-specific catalogue specifies 180cm.
What are the tubing dimensions?
The tubing is specified as 3mm internal diameter and 4.1mm external diameter.
Does Dosifix use a Luer-Lock fitting?
Yes. It has a male Luer-Lock connection.
Is the set suitable for gravity infusion?
Yes. This is the intended administration method.
Can Dosifix 4037014 be used with an infusion pump?
It is not designated as a pump-compatible set. Use the appropriate approved pump administration line where necessary.
What is the maximum pressure rating?
B. Braun lists 0.5 bar.
What is the difference between Dosifix and Dosifix SafeSet?
Dosifix SafeSet versions may include different injection-site, filtration and pump-compatible features.
Does this product contain PrimeStop?
No. B. Braun specifies no PrimeStop for article 4037014.
Is Dosifix sterile?
Yes. It is supplied sterile.
How is it sterilized?
B. Braun identifies ethylene oxide sterilization.
Can the set be reused?
No. It is disposable and intended for single use.
Does the product contain latex?
Material declarations differ between B. Braun's article-specific catalogue and some general Dosifix descriptions. Verify the supplied regional configuration and its label.
Is it suitable for every medication?
No. Medication compatibility and the intended infusion method must be assessed.
Does the burette replace a prescribed infusion-rate calculation?
No. The infusion must still be prescribed, controlled and monitored appropriately.
How many sets are in a manufacturer's box?
The specified standard sales unit is 25 sets.
What should I confirm before ordering?
Confirm the article reference, 150ml capacity, Y-injection type, tubing length, sterile packaging and quantity.
Does Maesio Pharmaceuticals arrange delivery outside Nairobi?
Yes. Delivery to other locations in Kenya can be discussed according to product availability and order requirements.
Technical Specification Note: B. Braun Dosifix article 4037014 is a sterile, single-use gravity infusion set with a 150ml burette, 60 drops/ml microdrip chamber, 15µm fluid filter, needle-access Y-site, two roller clamps and 180cm tubing. Product-specific material declarations should be confirmed against the actual supplied package.
Burette 50ml – High-Precision Glass Titration Instrument
Intrafix Primeline Standard Giving Set With Injection
Sangofix Air Vented Blood Giving Set Luer Lock Bbraun
Infusomat Space Line With Burette PVC 270cm Bbraun
Brain Heart Infusion (BHI) Agar 500G
Hypodermic Needles 100’s – Sterile, Sharp & Universal
Iv Giving Set With Air Vent
Measured Volume Set Burette 150 ml
Syringes -Pack
Wing Huber Needle Set (With Injection Site Port)20G*25MM
The Dosifix Giving Set 150ml Y-Injection Site Burette is a sterile B. Braun measured-volume IV administration set designed for controlled gravity infusion in suitable clinical situations.
Its 150ml graduated burette, 60 drops/ml microdrip chamber, 15µm filter and automatic float shut-off valve provide a defined configuration for professional infusion therapy.
The system also incorporates a needle-access Y-injection site, two roller clamps, vented piercing spike and male Luer-Lock connection.
It may be used during appropriately prescribed paediatric, neonatal and other intravenous treatments where measured-volume administration is required.
Before purchasing, healthcare facilities should verify B. Braun reference 4037014, the tubing configuration, injection-site type, packaging and expiry date.
Maesio Pharmaceuticals Limited supplies B. Braun burette giving sets, IV administration sets, infusion lines, syringes and related medical consumables for hospitals, clinics and healthcare facilities across Kenya.
Browse and Order: Maesio Pharmaceuticals Online Shop
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
