The Intrafix Primeline Standard Giving Set With Injection Site is a sterile, disposable intravenous administration set manufactured by B. Braun for the gravity-controlled infusion of compatible intravenous fluids and medications.
Also known as the B. Braun Intrafix Primeline Giving Set, Intrafix Primeline IV Set With Injection Site, B. Braun Standard IV Administration Set With Y-Site, Intrafix Primeline 180cm Giving Set or Intrafix Primeline REF 4062181, this product provides a fluid administration pathway between a compatible intravenous fluid container and the patient's vascular access device.
The Intrafix Primeline Standard Giving Set With Injection Site is identified by B. Braun manufacturer reference 4062181.
It belongs to the Intrafix Primeline range of standard intravenous administration sets.
The product is designed specifically for gravity infusion, where intravenous fluid is delivered through an administration line according to the prescribed treatment and appropriate flow regulation.
Its total tubing length is 180cm, providing a practical configuration for use with suitably positioned intravenous fluid containers.
The giving set incorporates a standard IV spike, vented drip chamber, fluid filter, roller clamp, needle-access injection site and male Luer Lock connection.
A distinguishing feature is its needle-access Safeline Y-injection site, which provides an additional point of access to the infusion line for compatible medication administration.
This injection site is not a needle-free valve.
The drip chamber contains a 15-micron fluid filter, intended to provide suitable particulate filtration during intravenous fluid administration.
The line has a nominal drip factor of 20 drops per millilitre, allowing drop counting when gravity infusion is being monitored.
The tubing is manufactured from polyvinyl chloride (PVC) and is declared by B. Braun to be free of DEHP and latex.
The internal tubing diameter is 3.0mm, while the external tubing diameter is 4.1mm.
B. Braun specifies a priming volume of 23.14mL for this exact product reference.
The roller clamp allows appropriate manual regulation of flow through the administration line.
At the patient end, the giving set has a male Luer Lock connector designed for attachment to compatible intravenous access devices.
The product is sterile, disposable and intended for single use.
It is sterilized using ethylene oxide.
The Intrafix Primeline Standard Giving Set With Injection Site is suitable for use in hospitals, clinics, medical wards, maternity facilities and other healthcare environments requiring appropriate gravity IV infusion equipment.
Manufacturer: B. Braun.
Brand: Intrafix.
Product Family: Intrafix Primeline.
Manufacturer Reference: 4062181.
Product Type: Standard IV Administration Set With Injection Site.
Infusion Method: Gravity.
Tubing Length: 180cm.
Tubing Material: PVC.
DEHP-Free: Yes.
Latex-Free: Yes.
Tubing Internal Diameter: 3.0mm.
Tubing External Diameter: 4.1mm.
Priming Volume: 23.14mL.
Drip Factor: 20 drops/mL.
Drip-Chamber Filter: 15µm fluid filter.
Container Connector: Standard IV spike.
Air Vent: Vented.
Flow Regulator: Roller clamp.
Injection Port: One needle-access Y-site.
Injection-Site Type: Safeline.
Needle-Free Valve: No.
Patient Connector: Male Luer Lock.
AirStop: Not included.
PrimeStop: Not included.
Light Protection: No.
Sterilization: Ethylene oxide.
Reusability: Single-use.
Manufacturer Sales Unit: 100 sets.
The Intrafix Primeline Giving Set price in Kenya depends on the manufacturer reference, packaging quantity, product availability and institutional procurement requirements.
Healthcare facilities should ensure that quotations specify the exact B. Braun Intrafix Primeline Standard Giving Set With Injection Site, reference 4062181.
Manufacturer and Product Reference
The giving set is manufactured by B. Braun under reference 4062181.
Injection-Site Configuration
This model includes a needle-access Y-injection site. Other Intrafix Primeline variants may have no injection port or a different type of access valve.
Tubing Length
The specified line measures 180cm.
Filter Configuration
The drip chamber incorporates a 15µm fluid filter.
Tubing Material
The product uses DEHP-free PVC tubing.
Packaging Quantity
B. Braun identifies a manufacturer sales unit of 100 sets.
Healthcare Procurement Volume
Hospitals and clinics may order quantities according to their intravenous therapy requirements.
Availability and Delivery
Current stock availability and order delivery arrangements should be confirmed before purchasing.
Order Online: Maesio Pharmaceuticals Online Shop
The B. Braun Intrafix Primeline Standard Giving Set With Injection Site is suitable for healthcare facilities requiring a standard gravity IV administration line with additional injection access.
Its 180cm tubing, vented drip chamber, 15µm fluid filter and roller clamp provide a defined configuration for appropriate intravenous fluid administration.
General medical wards.
Surgical wards.
Outpatient departments.
Emergency departments.
Maternity departments.
Postoperative recovery areas.
Specialist treatment rooms.
Hospital infusion departments.
Medical clinics.
Healthcare facilities providing prescribed IV therapy.
Provides a pathway for administering compatible prescribed IV solutions through a gravity infusion system.
The roller clamp allows healthcare professionals to manually regulate flow according to the prescribed treatment.
The needle-access Y-site provides an access point for compatible medication administration when permitted by the clinical protocol.
The drip chamber incorporates a 15µm filter designed for appropriate particulate filtration.
The drip chamber allows healthcare personnel to observe drops during gravity infusion.
The male Luer Lock fitting connects to suitable compatible IV devices.
The administration set forms a fluid pathway from a compatible intravenous fluid container to the patient's vascular access device.
The standard IV spike connects to the appropriate infusion container.
Fluid passes into the vented drip chamber, which incorporates a 15µm fluid filter.
The infusion solution then travels through the flexible PVC tubing.
A roller clamp allows the user to regulate fluid flow manually.
The needle-access Y-injection site provides additional access for compatible medications according to clinical requirements.
The male Luer Lock connector provides the patient-end connection.
During gravity infusion, the delivery rate depends on factors including fluid height, prescribed flow, line characteristics and the patient's vascular access.
The set does not independently control infusion volume or maintain a programmed rate.
It must be used and monitored by appropriately trained healthcare professionals.
The Intrafix Primeline REF 4062181 incorporates one Y-injection access point.
B. Braun identifies the injection-site type as Safeline.
The injection site is not the same as a needle-free valve.
Healthcare professionals must follow appropriate sharps precautions and aseptic procedures when accessing this port.
Medication compatibility must be established before administration through an existing infusion line.
The giving set incorporates a 15µm fluid filter inside the drip chamber.
The drip-chamber filter supports suitable particulate filtration.
It is not a microbial sterilizing filter and should not be used as a substitute for sterile preparation.
Medicines requiring a specific additional in-line filter must be administered using the appropriate approved equipment.
B. Braun specifies a nominal drip factor of 20 drops per millilitre for the Intrafix Primeline 4062181.
The drip factor describes the approximate number of drops corresponding to one millilitre under standardized conditions.
This characteristic is relevant to gravity infusion monitoring.
However, drop size and actual delivery may vary depending on fluid properties, equipment configuration and clinical conditions.
The prescribed infusion rate must be established and monitored according to the healthcare facility's protocol.
Suitable for administering compatible prescribed intravenous fluids by gravity.
May be used in wards requiring conventional gravity infusion equipment.
May support appropriate IV fluid therapy in surgical and recovery settings.
Can support compatible prescribed intravenous medications according to the manufacturer's intended use.
The Y-injection site provides access when suitable medication administration through the line is clinically permitted.
May be used in suitable outpatient facilities with appropriate clinical supervision.
The additional injection site is a key distinction, but the manufacturer also assigns different administration classifications to these references.
Important: REF 4062181 is not equivalent to REF 4062182. The exact reference must be confirmed during procurement.
The SafeSet product family is associated with B. Braun's AirStop and PrimeStop safety features.
These features should not be attributed to the standard Intrafix Primeline 4062181.
The two products serve different infusion requirements and should not be automatically substituted for one another.
Provides a needle-access point for compatible medication administration.
Offers a defined administration-line length.
Provides appropriate particulate filtration within the drip chamber.
Supports observation and monitoring of gravity infusion.
Allows manual adjustment of flow.
Uses the manufacturer's specified tubing material.
Provides attachment to suitable compatible vascular access devices.
Supports appropriate single-use clinical administration.
Store unopened giving sets according to the manufacturer's labelled requirements.
Keep the product in its original packaging until required.
Verify the product reference and expiry date.
Inspect the sterile barrier for damage.
Maintain appropriate aseptic technique during preparation.
Use only compatible intravenous fluids and accessories.
Ensure the injection site is accessed according to the manufacturer's instructions.
Do not reuse or resterilize a disposable administration set.
Dispose of used products according to the healthcare facility's clinical waste procedures.
The Intrafix Primeline Standard Giving Set With Injection Site is intended for professional clinical use.
REF 4062181 is classified by B. Braun as a gravity administration set.
It must not be assumed compatible with volumetric infusion pumps.
The needle-access Y-site requires appropriate sharps precautions.
It does not provide needle-free access.
The 15µm drip-chamber filter is not a sterilizing filter.
The set does not include AirStop or PrimeStop.
Appropriate priming, air management and ongoing infusion monitoring remain essential.
Healthcare professionals must confirm medication compatibility and prescribed infusion requirements.
The giving set must not be reused.
What is Intrafix Primeline Standard Giving Set With Injection Site?
It is a B. Braun sterile, disposable gravity IV administration set incorporating a needle-access Y-site for compatible additional medication administration.
What is the Intrafix Primeline Giving Set price in Kenya?
The price depends on procurement quantity, packaging requirements and product availability.
Where can I buy Intrafix Primeline in Nairobi?
You can order or enquire through Maesio Pharmaceuticals Limited.
Who manufactures Intrafix Primeline?
It is manufactured by B. Braun.
What is the manufacturer reference?
The exact reference is 4062181.
What is the tubing length?
The line measures 180cm.
What is the tubing made from?
PVC.
Is the tubing DEHP-free?
Yes. B. Braun declares that the product does not contain DEHP.
Does the product contain latex?
No. It is declared latex-free.
Does the giving set have an injection site?
Yes. It includes one needle-access Y-site.
Is the injection port needle-free?
No. The port is needle-access.
What is the name of the injection site?
B. Braun identifies it as Safeline.
Does the giving set include a drip chamber?
Yes.
What filter does the drip chamber contain?
A 15µm fluid filter.
Is the filter suitable for sterilizing fluids?
No. It is not a microbial sterilizing filter.
What is the drip factor?
20 drops per millilitre.
What is the priming volume?
23.14mL.
What is the tubing internal diameter?
3.0mm.
What is the tubing external diameter?
4.1mm.
Does the set include a roller clamp?
What connection does the patient end have?
A male Luer Lock connector.
Does it have an air vent?
Yes. It uses a vented configuration.
Can it be used for gravity infusion?
Yes. The exact reference 4062181 is classified as a gravity infusion set.
Is it suitable for infusion pumps?
B. Braun does not list pump compatibility for this exact gravity-only reference.
Is it the same as Intrafix Primeline 4062182?
No. The 4062182 variant has different features and is identified as pressure-compatible.
Does reference 4062181 have AirStop?
No.
Does it have PrimeStop?
Is the product light-protected?
No. It is not designated as a light-protected administration set.
Can it be used to administer medications?
Yes, when the medication, infusion route and clinical procedure are compatible.
Can a medication be administered through the Y-site?
Compatible medication administration may be performed according to the manufacturer's instructions and the clinical protocol.
Can it be used for blood transfusion?
A dedicated approved blood administration set should be selected when blood transfusion is required.
Is the giving set sterile?
How is it sterilized?
B. Braun specifies ethylene oxide sterilization.
Can it be reused?
No. It is a single-use product.
How many sets are in the manufacturer sales unit?
100 sets.
Can healthcare facilities request bulk orders?
Yes. Institutional procurement quantities can be discussed with Maesio Pharmaceuticals.
What should I confirm before ordering?
Confirm B. Braun reference 4062181, 180cm tubing, needle-access Y-site, gravity administration classification, packaging quantity and expiry date.
Does Maesio Pharmaceuticals arrange delivery outside Nairobi?
Yes. Delivery to other locations in Kenya can be discussed according to product availability and order requirements.
Technical Specification Note: The B. Braun Intrafix Primeline REF 4062181 is a sterile, disposable, 180cm gravity IV giving set with a 15µm fluid filter, 20 drops/mL drip factor, 23.14mL priming volume, needle-access Safeline Y-site and male Luer Lock connection.
Blood Giving Set (Single Chamber)
Dosifix Giving Set 150ml Y-Injection Site Burette Bbraun
Intrafix Safeset IV Administration Set AirStop
Sangofix Air Vented Blood Giving Set Luer Lock Bbraun
Sterican Standard Needle G21 x 1 1/2 Inch Bbraun (Box of 100)
Sterican Standard Needle G23 x 1 1/4 Inch Bbraun (Box of 100)
Perfusor Line Standard PVC 150cm Bbraun
I.V Infusion Giving Set (Soluset) 150ml
Iv Giving Set With Air Vent
Wing Huber Needle Set (With Injection Site Port)20G*25MM
The Intrafix Primeline Standard Giving Set With Injection Site is a sterile B. Braun intravenous administration set designed for suitable gravity infusion therapy.
Its 180cm DEHP-free PVC tubing, 15µm fluid filter, needle-access Safeline Y-site, roller clamp and male Luer Lock connection provide a defined configuration for standard clinical intravenous administration.
The product is intended for single use by trained healthcare professionals.
Before ordering, healthcare facilities should confirm B. Braun REF 4062181, the needle-access injection-site configuration, gravity administration requirements, packaging quantity and expiry date.
Maesio Pharmaceuticals Limited supplies B. Braun IV giving sets, infusion administration sets, Intrafix SafeSet products, burette giving sets, transfusion sets and related medical consumables for hospitals, clinics and healthcare facilities across Kenya.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
