The Meditech 5-parameter patient monitor is a multiparameter vital signs monitoring system designed for hospitals, clinics, emergency rooms, ICUs, HDUs, theatres and other healthcare environments. The current Kenya listing specifies five core parameters: ECG, SpO₂, NIBP, RESP and temperature. It comes with a stand and is listed for adult, pediatric and neonatal patient monitoring.
The monitor uses a 12.1-inch high-resolution colour TFT LCD to display patient readings and waveforms. Its listed features include configurable audible and visual alarms, trend analysis, rechargeable battery backup and multiple mounting options.
The Meditech monitor combines five commonly required vital-sign measurements in one device:
ECG – 3/5-lead selectable ECG monitoring
SpO₂ – Digital oxygen saturation monitoring with pleth waveform
NIBP – Non-invasive blood pressure monitoring
RESP – Respiration monitoring using thoracic impedance
Temperature – Dual-channel T1/T2 temperature monitoring
The current product specification lists a heart-rate range of 15–300 bpm, SpO₂ measurement from 0–100%, NIBP measurement from 10–270 mmHg, respiration from 0–120 rpm and temperature from 0–50°C.
The Meditech patient monitor with stand provides a mobile setup for clinical areas where the monitor needs to be positioned beside different beds or treatment areas.
The listed mounting options include bedside, wall-mount and trolley-mount configurations, while the product listing specifically offers the monitor with a stand.
A stand can make the monitor easier to position at an appropriate viewing height and move within a ward or clinical area. The exact stand configuration should be confirmed when ordering.
12.1-inch high-resolution colour TFT LCD
ECG, SpO₂, NIBP, RESP and temperature monitoring
3/5-lead selectable ECG
Digital SpO₂ with pleth waveform
Automatic, manual and STAT NIBP modes
Dual-channel temperature monitoring
Audible and visual configurable alarms
Rechargeable lithium battery
Approximately 2–4 hours of battery backup according to the current listing
USB connectivity
Bedside, wall and trolley mounting options
Adult, pediatric and neonatal patient types
Supplied with a stand in the listed configuration
A 5-parameter multiparameter patient monitor allows healthcare professionals to view several vital signs from a single monitoring system.
It can be considered for:
General hospital wards
Intensive care units
High-dependency units
Emergency rooms
Operating theatres
Recovery rooms
Clinics
Ambulance and patient transport applications
The appropriate monitor configuration depends on the patient's age group, clinical environment and required monitoring parameters.
The Meditech 5-parameter monitor supports 3-lead and 5-lead ECG configurations. The listed heart-rate range is 15–300 bpm, with selectable sweep speeds of 12.5, 25 and 50 mm/s.
ECG monitoring should be performed using the supplied or manufacturer-approved ECG cable and electrodes according to the equipment instructions.
The SpO₂ module provides non-invasive oxygen saturation monitoring together with a plethysmographic waveform. The current product specification lists a measurement range of 0–100% and ±2% accuracy for the stated 70–99% range.
The appropriate SpO₂ sensor should be selected for the patient's age, size and intended application.
The non-invasive blood pressure module uses an oscillometric method and provides manual, automatic and STAT measurement modes.
The listed NIBP range is 10–270 mmHg.
Using the correct cuff size is important for obtaining appropriate blood-pressure measurements.
The RESP function uses thoracic impedance to monitor respiration. The listed measurement range is 0–120 respirations per minute.
The respiration waveform and numerical reading can be viewed together with the other monitored parameters.
The Meditech monitor provides dual-channel T1/T2 temperature monitoring. The listed temperature range is 0–50°C, with stated accuracy of ±0.1°C.
Compatible temperature probes should be used according to the manufacturer's instructions.
The current product listing specifies support for:
Adult patients
Pediatric patients
Neonatal patients
The appropriate patient mode, sensors, cuffs and accessories should be selected by trained healthcare personnel according to the patient's requirements.
Position the monitor and stand securely beside the patient's bed or treatment area.
Connect the monitor to an appropriate power supply.
Select the correct patient category.
Connect the ECG cable and apply the electrodes correctly.
Attach the appropriate SpO₂ sensor.
Select and apply the correct NIBP cuff.
Connect the temperature probe where required.
Start the required monitoring functions.
Confirm that the displayed waveforms and numerical readings are appropriate.
Configure alarm limits according to the clinical protocol.
Review stored trends and measurements when required.
Clean and maintain the equipment according to the manufacturer's instructions.
The device should be operated by appropriately trained healthcare professionals.
The current Maesio Pharmaceuticals Kenya listing shows the Meditech/Auditech 5-Parameter Patient Monitor with Stand at KSh 130,000. This is a supplier-specific listing price and may change depending on availability, configuration, accessories, delivery and other procurement requirements.
Before purchasing, confirm that the quotation includes the stand and the required monitoring accessories.
The current listing specifies the following accessories:
ECG cable
Adult NIBP cuff
SpO₂ probe
Temperature probe
Power cable
User manual
The product is listed at KSh 130,000 in the current Kenya listing.
A 5-parameter monitor provides a consolidated view of five commonly required vital signs. This can simplify bedside observation by displaying ECG, SpO₂, NIBP, respiration and temperature on one screen.
When selecting a Meditech 5-parameter monitor, healthcare facilities should consider:
Required patient categories
Display size and visibility
ECG lead configuration
SpO₂ sensor availability
NIBP cuff sizes
Temperature-probe requirements
Battery backup
Alarm functions
Trend-storage capability
Stand or trolley requirements
Availability of replacement accessories
Local technical support
Specifications are based on the current Kenya product listing and should be confirmed against the exact unit supplied.
It is a multiparameter patient monitoring machine designed to monitor ECG, SpO₂, NIBP, respiration and temperature. The current Meditech/Auditech listing includes a 12.1-inch display and stand configuration.
The five listed parameters are ECG, SpO₂, NIBP, RESP and temperature.
Yes. The current product listing is specifically for the 5-Parameter Patient Monitor with Stand.
Yes. The current listing specifies adult, pediatric and neonatal patient types. Appropriate patient modes and accessories should be used for each category.
The current Maesio Pharmaceuticals listing shows a price of KSh 130,000 for the Meditech/Auditech 5-Parameter Patient Monitor with Stand. Prices may change, so confirm the current quotation before ordering.
Yes. The listed specification includes a rechargeable lithium battery with approximately 2–4 hours of backup.
The current listing specifies an ECG cable, adult NIBP cuff, SpO₂ probe, temperature probe, power cable and user manual.
The Meditech/Auditech 5-Parameter Patient Monitor with Stand is currently listed by Maesio Pharmaceuticals in Kenya. Availability and final pricing should be confirmed before purchase.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
