The Mindray uMEC 120 patient monitor is a compact multi-parameter bedside monitor designed for monitoring essential physiological parameters in healthcare settings. Mindray's uMEC 100/120/150 series is designed to provide stable monitoring of essential patient parameters, with a touchscreen interface, fanless design and rechargeable lithium-ion battery.
The uMEC 120 can be configured for clinical environments such as hospital wards, high-dependency units, theatre recovery and other areas requiring bedside vital-sign monitoring. A current Kenyan listing describes the uMEC 120 as a ward/HDU monitor with ECG, SpO₂, NIBP, respiration and temperature as standard parameters, with EtCO₂ and IBP available depending on configuration.
The Mindray uMEC 120 monitor combines several vital-sign measurements in one bedside unit.
Depending on the exact configuration, the monitor can provide:
ECG
SpO₂
Non-invasive blood pressure (NIBP)
Respiration (RESP)
Temperature (TEMP)
Pulse rate (PR)
Optional invasive blood pressure (IBP)
Optional EtCO₂
Audible and visual alarms
Trend data storage
Touchscreen operation
Network connectivity on supported configurations
The exact parameters and installed options should be confirmed when requesting a quotation because configuration can vary.
The Mindray uMEC 120 ward monitor is suitable for hospital wards where clinicians need to observe several vital signs from a single bedside screen.
The current Kenyan listing identifies the uMEC 120 for wards, HDU, OPD and theatre-recovery applications.
Its compact design, touchscreen controls, battery operation and fanless construction can make it practical for environments where monitors may need to be moved between beds or used during routine patient observation.
The Mindray uMEC 120 ICU monitor can be considered for critical-care environments when its installed parameter configuration meets the clinical requirements of the unit.
The uMEC platform supports ECG, SpO₂, NIBP, respiration and temperature, while additional parameters such as IBP and CO₂ are supported through applicable interfaces/configurations.
For ICU procurement, confirm whether the specific unit includes the required invasive pressure, CO₂, networking and central-monitoring capabilities rather than assuming that every uMEC 120 package has the same configuration.
A Mindray patient monitor is designed to provide clinicians with real-time physiological information at the patient's bedside.
The uMEC series incorporates Mindray's multi-lead ECG algorithm, NIBP measurement technology and SpO₂ processing. Mindray also specifies touchscreen operation, external USB storage support, large data-storage capacity and up to 12 hours of continuous operation with one lithium-ion battery for the uMEC 100/120/150 series.
Brand: Mindray
Model: uMEC 120
Product type: Compact multi-parameter patient monitor
Display: 12.1-inch screen according to the current Kenyan listing
Standard parameters: ECG, SpO₂, NIBP, RESP and TEMP
Optional parameters: IBP and EtCO₂, depending on configuration
ECG: 3/5-lead configuration with arrhythmia detection
SpO₂: Mindray or Nellcor technology depending on configuration
NIBP: Automatic, manual and STAT modes
Respiration: Thoracic impedance
Temperature: Dual probes
Trend storage: Up to 120 hours according to the current Kenyan listing
Alarms: Audible and visual
Battery: Approximately 3–4 hours according to the current Kenyan listing; Mindray's newer uMEC series documentation specifies up to 12 hours depending on configuration and battery setup
Connectivity: USB and optional LAN/network connectivity
Design: Fanless
Applications: Wards, HDU, OPD, theatre recovery and other clinical environments
Note: Battery runtime and other specifications can vary according to configuration, battery condition and operating conditions. Confirm the supplied specification before purchase.
The Mindray uMEC 120 supports ECG monitoring using compatible Mindray ECG accessories.
Mindray states that the uMEC series uses its multi-lead ECG algorithm. The current Kenyan listing specifies 3/5-lead ECG and arrhythmia detection for the uMEC 120.
The monitor supports oxygen-saturation monitoring using a compatible SpO₂ sensor.
The uMEC series incorporates an anti-interference SpO₂ algorithm, while the current Kenyan listing identifies Mindray or Nellcor SpO₂ technology depending on configuration.
Non-invasive blood pressure monitoring allows clinicians to measure blood pressure using an appropriate cuff.
The uMEC 120 listing specifies automatic, manual and STAT NIBP modes. Mindray also describes a quick-measurement technique for the uMEC series.
The correct cuff size and patient category should always be selected according to the manufacturer's instructions.
The uMEC 120 provides respiration monitoring using thoracic impedance and temperature monitoring through compatible temperature probes. The current Kenyan listing describes dual temperature probes.
These parameters can be displayed alongside ECG, SpO₂ and NIBP to provide a broader view of the patient's physiological status.
Some uMEC 120 configurations can support additional parameters such as invasive blood pressure (IBP) and EtCO₂.
Mindray's technical documentation identifies dedicated interfaces for IBP and CO₂ within the uMEC series.
Because these functions can depend on installed modules and accessories, confirm the required configuration before purchasing.
Mindray describes the uMEC series as having a standard touchscreen with gesture operation. Users can adjust functions such as screen brightness and alarm volume through the interface. The series also supports self-learning features intended to help caregivers become familiar with operation.
The Mindray uMEC 120 uses a fanless design. Mindray identifies low power consumption and fanless construction among the reliability and design features of the uMEC series.
A fanless design can also reduce mechanical components associated with conventional fan cooling.
The uMEC series uses a rechargeable lithium-ion battery. Mindray states that the uMEC 100/120/150 series can provide up to 12 hours of continuous operation with one lithium-ion battery, while actual runtime depends on configuration and operating conditions.
Battery condition and replacement intervals should be considered when planning equipment maintenance.
The uMEC series supports USB connectivity and can support wired or wireless network interfaces depending on configuration. Mindray's technical documentation identifies TCP/IP and HL7 support for network communication with a central monitoring system or server.
Hospitals planning central monitoring or clinical-system integration should confirm compatibility with their existing infrastructure before procurement.
The Mindray uMEC 120 patient monitor can be used in:
General hospital wards
High-dependency units
Outpatient departments
Theatre recovery areas
Step-down care areas
Critical-care environments where the configured parameters are appropriate
Other bedside monitoring applications
The current Kenyan listing specifically identifies wards, HDU, OPD and theatre recovery among the applications.
The monitor should be operated by trained healthcare professionals according to the manufacturer's instructions and the healthcare facility's procedures.
A general workflow is:
Connect the monitor to the appropriate power source.
Switch on the monitor and allow the startup sequence to complete.
Select the appropriate patient category.
Connect the ECG cable and correctly positioned electrodes.
Apply the appropriate SpO₂ sensor.
Select the correct NIBP cuff size and position it correctly.
Connect temperature probes where required.
Confirm that waveforms and numerical values are displayed.
Set alarm limits according to the patient's clinical requirements and facility protocol.
Monitor the displayed parameters and respond appropriately to alarms.
Clean and maintain the equipment according to the manufacturer's instructions.
For IBP or EtCO₂ monitoring, use only the appropriate compatible modules, accessories and procedures.
Before buying a Mindray uMEC 120 monitor, confirm:
Required monitoring parameters
Adult, pediatric or neonatal requirements
ECG lead configuration
SpO₂ technology and sensor requirements
NIBP cuff sizes
Temperature-probe requirements
IBP requirement
EtCO₂ requirement
Battery configuration
Network connectivity
Central monitoring requirements
Required mounting or trolley
Included accessories
Warranty
Local technical support
Availability of genuine replacement accessories
For institutional procurement, request a detailed quotation showing the monitor configuration and all included accessories.
Depending on the configuration, accessories can include:
ECG cable
ECG electrodes
SpO₂ sensor
NIBP cuffs
Temperature probes
Power cable
Rechargeable battery
IBP accessories where applicable
CO₂ accessories where applicable
Mounting or trolley accessories
The exact accessory package should be confirmed with the supplier before purchase.
The current Maesio Pharmaceuticals listing shows the Mindray uMEC 120 at KSh 280,000.
A separate Kenyan listing currently shows a Mindray uMEC 120 12.1-inch 7-parameter patient monitor at KSh 830,000.
These should be treated as supplier-specific listing examples rather than a fixed market price. The large difference may reflect differences in configuration, included modules, accessories, warranty, service arrangements or other supply terms.
When requesting a quotation, specify whether you require the standard ward configuration or additional functions such as IBP and EtCO₂.
The Mindray uMEC 120 is a compact multi-parameter patient monitor designed for bedside monitoring of essential physiological parameters.
The standard configuration listed in Kenya includes ECG, SpO₂, NIBP, respiration and temperature. IBP and EtCO₂ may be available depending on the configuration.
Yes. The current Kenyan listing specifically describes the uMEC 120 as a ward/HDU monitor and lists wards among its applications.
It can be used in critical-care environments when its installed configuration provides the parameters required by the clinical unit. Additional ICU requirements such as IBP or EtCO₂ should be confirmed before purchase.
IBP is supported by the uMEC platform through an appropriate interface/configuration, but it should not be assumed to be included in every uMEC 120 package.
EtCO₂/CO₂ monitoring is supported by applicable uMEC configurations. Confirm that the required module and accessories are included in the specific unit being purchased.
Yes. Mindray describes the uMEC series as having a standard touchscreen with gesture operation.
A current Maesio Pharmaceuticals listing shows KSh 280,000, while another Kenyan listing shows KSh 830,000 for a 7-parameter uMEC 120 listing. Confirm the exact configuration and included accessories before comparing quotations.
Yes. The uMEC series uses a lithium-ion rechargeable battery. Mindray states up to 12 hours of continuous operation for the series with one battery, depending on configuration and operating conditions.
The uMEC series supports wired or wireless network interfaces depending on configuration, with technical documentation identifying TCP/IP and HL7 network communication.
Important: Specifications, installed modules and included accessories can vary between uMEC 120 configurations. Confirm the exact quotation, modules, accessories, software functions, warranty and service arrangements before ordering.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
