The OEM Volumetric Infusion Pump Kenya is a universal-type electronic infusion pump designed for controlled delivery of IV fluids, medications and other compatible solutions in professional healthcare environments. This type of volumetric infusion pump provides programmable fluid delivery and can be considered for hospitals, clinics, wards, theatres, emergency departments and other clinical settings.
The current listed price for the OEM Volumetric Infusion Pump (Universal Type) in Kenya is KSh 55,000. This is the current catalogue price for the listed OEM universal-type model and should be treated as a supplier-specific listing price.
Prices for volumetric infusion pumps in Kenya vary according to brand, model, flow-rate range, alarm system, battery configuration, compatible IV sets, warranty and technical support.
For comparison, current Kenyan listings include the EcoMed EIP-680 at KSh 69,000, while a CONTEC volumetric infusion pump is listed at KSh 85,000. These are different products and should not be treated as the price of the OEM universal model.
For hospital procurement, confirm the exact model, specifications, accessories, warranty, training and after-sales support before placing an order.
A universal volumetric infusion pump is an electronic pump designed to control the delivery of IV fluids through a compatible administration set.
The term universal may refer to compatibility with commonly used IV tubing or giving sets, but compatibility is always model-specific. Buyers should therefore confirm the manufacturer's approved IV-set requirements rather than assuming that every standard giving set can be used.
A volumetric pump is different from a syringe pump because it normally controls fluid delivery through an IV administration set rather than mechanically advancing a syringe plunger.
Depending on the exact OEM model and configuration, a universal volumetric infusion pump may include:
Programmable infusion rate
Digital display
Controlled IV fluid delivery
Adjustable infusion parameters
Infusion-volume programming
Occlusion detection
Air-in-line detection on applicable models
End-of-infusion alarm
Low-battery alarm
Door or setup alarm
AC mains operation
Rechargeable battery backup on applicable models
IV-pole or infusion-stand mounting
Compact bedside design
Because the current Maesio catalogue listing identifies the product as an OEM Volumetric Infusion Pump (Universal Type) without providing a detailed model number on the category page, exact technical specifications should be confirmed before purchase.
An OEM volumetric infusion pump in Kenya can be considered by healthcare facilities seeking an electronic solution for controlled IV infusion.
OEM equipment can be supplied under different manufacturing and private-label arrangements. Therefore, institutional buyers should verify:
Manufacturer
Exact model number
Product documentation
Technical specifications
Applicable regulatory documentation
IV-set compatibility
Warranty
Spare-parts availability
Local technical support
Training requirements
Do not assume that the term OEM alone establishes a particular certification, regulatory approval or manufacturer identity. These details should be confirmed from the actual supplier documentation.
A universal volumetric infusion pump in Kenya may be suitable where a healthcare facility needs controlled infusion through compatible IV administration sets.
When evaluating a universal infusion pump, pay particular attention to the meaning of "universal" in the supplier's specification. Some pumps support multiple commonly used IV sets, while others require specific tubing or calibrated administration sets.
Always confirm compatibility before ordering large quantities of consumables.
When you buy a universal infusion pump in Kenya, consider more than the initial equipment price.
Important purchasing factors include:
Exact manufacturer and model
Flow-rate range
Flow accuracy
Compatible IV sets
VTBI range
Infusion modes
Air-in-line detection
Alarm functions
Battery runtime
Power requirements
Mounting options
Training
Local servicing and spare parts
For hospitals and clinics, requesting a formal quotation with a complete technical specification can help prevent purchasing an incompatible or incorrectly configured pump.
A suitable volumetric infusion pump can be used in professional healthcare environments including:
Volumetric pumps can provide controlled IV administration where prescribed treatment requires regulated fluid delivery.
ICU environments may require controlled delivery of fluids and medications. The selected pump should meet the clinical and patient-specific requirements of the department.
HDU patients may require monitored IV therapies using appropriate infusion equipment.
Infusion pumps can support controlled administration of prescribed fluids and medications during perioperative care.
A portable pump can provide controlled infusion during emergency treatment where clinically indicated.
Some volumetric pumps are suitable for paediatric applications. The exact model must be checked for its minimum flow rate, accuracy and manufacturer-approved patient categories.
Some models may support neonatal applications, particularly where controlled low-volume infusion is required. Suitability must be confirmed for the exact device.
Volumetric infusion pumps can support prescribed IV therapy in maternity and post-delivery clinical settings.
Depending on the clinical prescription and device compatibility, volumetric infusion pumps may be used to deliver:
IV fluids
Prescribed medications
Electrolyte solutions
Nutritional solutions
Antibiotics
Other compatible infusion fluids
The pump should only be used with solutions and administration sets approved or specified for the particular device.
The pump regulates fluid delivery according to programmed parameters.
Digital controls allow trained users to enter and monitor infusion settings.
Depending on the model, alarms can help alert healthcare professionals to conditions such as occlusion, air in the line, low battery or completion of infusion.
A volumetric pump actively controls infusion rather than relying solely on the height of an IV fluid container.
Many volumetric infusion pumps are designed for bedside mounting or attachment to an infusion stand.
Where equipped with a rechargeable battery, the pump can continue operating temporarily during a power interruption or patient transfer, subject to the battery specification.
Both devices provide controlled infusion, but their delivery mechanisms differ.
The appropriate device depends on the prescribed treatment, required volume, flow rate and patient requirements.
The exact procedure must follow the manufacturer's instructions and the healthcare facility's approved clinical protocol.
A general workflow includes:
Inspect the pump, power cable and battery status.
Confirm the prescribed fluid or medication.
Check IV administration-set compatibility.
Prepare and prime the infusion set according to clinical procedure.
Load the tubing correctly into the pump.
Secure the pump door or tubing mechanism.
Enter the prescribed infusion parameters.
Verify the settings before starting.
Start the infusion.
Monitor the patient and pump throughout operation.
Respond appropriately to alarms.
Document the infusion according to facility procedures.
Only appropriately trained healthcare professionals should operate and program the equipment.
Ask the supplier to identify the actual manufacturer and model number.
Confirm the minimum and maximum programmable flow rates.
Request the manufacturer's stated accuracy and the conditions under which it applies.
Confirm which administration sets are supported. Do not assume that "universal" means every IV set is compatible.
Check whether the pump includes relevant alarms such as:
Occlusion
Air-in-line
Low battery
End of infusion
Door open
Flow error
Confirm the battery type, expected operating time and charging requirements.
Check whether the pump supports the modes required by your clinical department.
Confirm the warranty period and what components and services it covers.
For healthcare facilities, local servicing, preventive maintenance and spare-parts availability are important considerations.
Request the user manual, technical specifications and applicable product documentation before institutional procurement.
One of the most important considerations when purchasing a universal infusion pump is IV-set compatibility.
A pump may be marketed as universal, but the exact tubing requirements can still depend on the manufacturer and model. Some systems may require specific calibrated or approved administration sets.
Before purchasing, confirm:
Approved IV-set types
Tubing dimensions
Drip chamber requirements
Pump calibration requirements
Whether standard sets are supported
Whether dedicated consumables must be purchased
This can have a significant impact on the long-term operating cost of the pump.
Clean and disinfect the infusion pump according to the manufacturer's instructions and the healthcare facility's infection-prevention procedures.
Routine inspection should include:
Pump housing
Display and controls
Power cable
Battery condition
Pump door
Tubing pathway
Alarm operation
Mounting mechanism
Healthcare facilities should also maintain an appropriate preventive-maintenance programme, including functional and performance checks according to manufacturer recommendations.
An OEM volumetric infusion pump for hospitals should be evaluated as part of the facility's overall infusion-equipment programme.
Hospitals purchasing multiple pumps should consider standardizing models where practical. Standardization can simplify:
Staff training
Consumable management
Preventive maintenance
Spare-parts procurement
Equipment troubleshooting
Clinical workflow
A formal technical evaluation is recommended before purchasing equipment for critical-care environments.
The current Maesio Pharmaceuticals listing shows the OEM Volumetric Infusion Pump (Universal Type) at KSh 55,000.
A universal volumetric infusion pump is an electronic device designed to control IV fluid delivery using a compatible administration set. The exact meaning of "universal" depends on the manufacturer's specifications.
An OEM product may be manufactured for supply under a particular commercial or private-label arrangement, while a branded pump is sold under an identified manufacturer's brand. Buyers should verify the actual manufacturer, documentation, warranty and technical support rather than relying on the term OEM alone.
A suitable volumetric infusion pump can be used in ICU settings when its specifications meet the clinical requirements. The exact model, patient category and compatible consumables should be verified before use.
Not necessarily. "Universal" does not automatically mean compatibility with every IV administration set. Confirm the manufacturer's approved or recommended sets before use.
Some models are designed for paediatric use. Confirm the exact model's flow range, accuracy, alarms and manufacturer-approved patient categories before use.
Some pumps are suitable for neonatal applications, but this must be confirmed for the exact model. Low flow rates, accuracy and appropriate safety features are particularly important considerations.
Many models have rechargeable battery backup, but battery runtime varies by model. Confirm the exact battery specification before purchase.
Current Kenyan listings vary by model. The OEM Universal Type is listed at KSh 55,000, while other volumetric pumps on the same Kenyan catalogue include the EcoMed EIP-680 at KSh 69,000, CONTEC at KSh 85,000 and COMEN ME600 at KSh 85,000.
A universal infusion pump can be sourced from medical equipment suppliers serving the Kenyan market. Before ordering, request confirmation of the exact model, IV-set compatibility, warranty, technical support and current stock.
The current Maesio catalogue identifies the product as OEM Volumetric Infusion Pump (Universal type) at KSh 55,000 but does not provide a detailed model number on the category listing. For that reason, model-specific technical figures should be confirmed before publishing them as fixed specifications.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
