The 12mm plastic wall clamp is a compact pipe-support accessory designed to secure compatible tubing to walls and other suitable mounting surfaces. It provides a simple method of keeping small-diameter pipes aligned and securely positioned during installation.
12mm plastic wall clamps are particularly useful where small pipework needs to be routed neatly along a wall or structural surface. In Kenyan medical-gas project documentation, 12mm plastic wall clamps are specifically listed alongside 15mm and 22mm versions as distribution accessories for medical oxygen pipeline installations.
The exact pipe compatibility, fixing method and material should be confirmed against the specific clamp supplied.
A 12mm pipe wall clamp is designed to hold tubing with an approximately 12mm outside diameter against a wall or other suitable supporting surface.
Depending on the design, the clamp can be fixed using an appropriate screw, anchor or other fastening system. The correct fixing method depends on the wall material and the installation requirements.
For medical gas systems, the support should be installed according to the pipeline design and applicable medical gas installation requirements.
The plastic pipe clamp 12mm provides lightweight support for compatible pipe and tubing installations.
Potential advantages of a plastic clamp include:
Lightweight construction
Simple installation
Compact profile
Suitable for small-diameter tubing
Neat pipe routing
Easy positioning along walls
Useful for installation and maintenance work
Exact material properties depend on the manufacturer and product model, so specifications such as polymer type, temperature resistance and load capacity should be confirmed before purchase.
The 12mm wall pipe clip can be used to secure compatible tubing against a wall or other mounting surface.
Pipe clips are useful when installation requires tubing to remain in a fixed position rather than hanging loosely or moving along the wall.
Common applications may include:
Medical gas pipeline accessories
Small-diameter tubing
Plumbing installations
Utility pipework
Equipment connections
General maintenance installations
The clip should be matched to the actual outside diameter of the tubing rather than selected solely by nominal pipe size.
A plastic pipe support clamp provides mechanical support for compatible tubing while helping maintain an organized installation.
For medical gas pipeline projects, plastic wall clamps may be used as part of the pipe-support arrangement specified for the installation. A Kenyan medical oxygen tender document lists 12mm, 15mm and 22mm plastic wall clamps as distribution accessories.
The clamp is a support accessory and should not be confused with a pressure-bearing pipe fitting or a connection component.
Product type: Plastic pipe wall clamp
Nominal size: 12mm
Application: Pipe and tubing support
Mounting: Wall or suitable structural surface
Material: Plastic/polymer construction, model-dependent
Lightweight and compact
Designed for neat pipe routing
Suitable for compatible small-diameter tubing
Useful for medical gas pipeline support applications where specified
Simple installation with an appropriate fixing
Note: Exact dimensions, polymer type, fixing-hole size, colour and load capacity depend on the specific product model.
The 12mm plastic wall clamp can be used for suitable:
Supporting compatible small-diameter pipework or tubing as part of a medical gas installation where the project specification calls for plastic wall clamps.
Helping organize and secure tubing along walls in healthcare facilities.
Supporting suitable small-diameter plumbing tubing and pipework.
Securing tubing connected to equipment or other fixed installations.
Replacing damaged or missing pipe-support clips during maintenance work.
Medical gas pipeline installations require carefully selected components and appropriate installation procedures.
Where a 12mm plastic wall clamp is specified for an MGPS, the clamp should be compatible with the pipe diameter, installation environment and project requirements. It should be installed at the required support locations and fixed securely to an appropriate surface.
Kenyan medical oxygen project documentation lists 12mm plastic wall clamps together with Munsen rings, threaded rods and oxygen terminal outlets as distribution accessories.
The complete medical gas pipeline system should be installed, tested and commissioned by appropriately qualified personnel.
A general installation process is:
Confirm that the clamp matches the tubing outside diameter.
Mark the required support position.
Select a suitable fixing for the wall or supporting surface.
Drill the fixing hole where required.
Insert the appropriate anchor or fixing.
Position the pipe or tubing in the clamp.
Secure the clamp without excessively compressing the tubing.
Check that the pipe remains correctly aligned.
Repeat at the required support intervals.
Inspect the completed installation.
For medical gas applications, follow the specific project design and applicable medical gas pipeline requirements.
When selecting a 12mm pipe wall clamp, consider:
Actual pipe outside diameter
Clamp internal diameter
Plastic material
Temperature range
Environmental conditions
Wall or surface type
Fixing method
Required support spacing
Pipe material
Intended application
For medical gas installations, also confirm that the clamp is acceptable for the specified installation and does not compromise the cleanliness, routing or support requirements of the pipeline.
When installing pipe-support clamps:
Use the correct clamp size.
Use appropriate wall anchors and screws.
Do not overtighten the clamp around the tubing.
Avoid damaging the pipe surface.
Ensure the supporting structure can carry the installation load.
Maintain the required pipe alignment and support spacing.
Follow the applicable project specifications.
For medical gas systems, use trained and qualified installation personnel.
A wall clamp provides mechanical support; it does not replace the requirements for proper pipe joints, valves, terminal units, pressure testing or commissioning.
A reliable current retail price for the exact 12mm plastic wall clamp was not verified from a current Kenyan retail listing.
However, Kenyan medical-gas project documentation confirms that 12mm plastic wall clamps are specified as installation accessories.
The final price can vary according to material, design, quantity and supplier. For hospital or medical gas projects, request a quotation based on the required quantity and exact clamp specification.
A 12mm plastic wall clamp is a pipe-support accessory designed to secure compatible 12mm tubing against a wall or other suitable mounting surface.
It is used to hold compatible pipe or tubing in a fixed position and maintain neat, organized routing.
It can be used where the specific clamp is approved or specified as part of the medical gas installation. Kenyan medical oxygen project documents specifically list 12mm plastic wall clamps among MGPS distribution accessories.
The nominal size indicates a clamp intended for approximately 12mm tubing, but the actual internal diameter should be checked against the product specification before purchase.
Compatibility depends on the clamp design. Some plastic pipe clamps are intended for copper or other rigid tubing, while others are designed for plastic tubing. Confirm the manufacturer's specifications before using one with copper pipe.
The clamp is normally secured using an appropriate screw and wall anchor or another suitable fixing system. The fixing should be selected according to the wall construction and installation load.
Appropriately specified clamps can form part of a hospital medical gas pipeline support arrangement. The complete system must be installed and commissioned according to the applicable medical gas requirements.
Depending on the pipe size and installation design, medical gas systems can use Munsen rings, hospital brackets, threaded rods, plastic wall clamps and other suitable pipe-support components.
Important: Confirm the exact internal diameter, material, fixing arrangement and intended application before ordering.
These other products might interest you
Allow the use of cookies from this website on this browser?
We use cookies to provide improved experience on this website. You can learn more about our cookies and how we use them in our Cookie Policy.
